The ARB Jeep Wrangler JK Stubby Bumper was designed for the off-roader who wants a winch bumper that maintains maximum clearance for bigger tires. Tires larger than 35" may rub on the wings of a traditional style ARB Deluxe bumper. However,the JK Stubby Bumper eliminates this problem since the bumper is only as wide as the Wrangler JK's grille. Although the bumper is very compact, it is still fully SRS compatible. Both outer wing sections have high lift jacking points. Bolt-on brackets allow for the installation of driving lights to the bumper. The 76mm (3") main tube has a mount that can be used for LED light bars or antennas. Each outer wing section also has 20mm (.79") thick 350 grade recovery points that attach directly into the chassis mounts. The Stubby Bumper also features a new vacuum pump relocation bracket for later model vehicles. You can fit most traditional low mount style winches and narrow mount pattern competition type winches to the winch platform. Run your control box in the center of the bumper with the bracket that is provided. Two flip-up style license plate mounts are provided on the front of the bumper, one for the roller fairlead and one for the Hawse fairlead. Now you can flip the license plate over the fairlead and out of the way when the winch is being used!