{"title":"Motobilt Jeep Bumpers, Armor, Suspension, DIY Builder Parts","description":"","products":[{"product_id":"motobilt-spare-tire-delete-tag-mount-tag-light-combo-for-jeep-jl-jlu2","title":"Jeep JL Spare Tire Delete Tag Mount and Tag Light 2018-Present Wrangler JL Motobilt","description":"\u003cp\u003eJeep JL Spare Tire Delete Tag Mount 2018-Present Wrangler JL. The Motobilt Jeep JL spare tire delete kit and tag mount bolts in place of the factory spare tire mount. Fits both 2 and 4 door.\u003c\/p\u003e\n\u003cp\u003eThe mount consist of 3 main pieces including the base plate, the formed tag mount, and the back up camera mount.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is relocated to below the tag and the angle of the mount is altered so that the camera view lines up perfectly.\u003c\/p\u003e\n\u003cp\u003eThese mounts are shipped raw metal and can be painted or powder coated to meet your exact needs.\u003c\/p\u003e\n\u003cp\u003eYou will reuse your factory hardware to mount the tag kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMotobilt offers:\u003c\/strong\u003e Off Road Only LiteT Plate Light with 6 foot disconnect able harness Please see below for more information. This is a Lite Plate Light with a six foot disconnectable harness and solder seal connectors for splicing into the wiring harness.\u003c\/p\u003e\n\u003cp\u003eThe Lite Plate Light's rugged design is completely sealed, vibration and water proof. It is ideal for an off road vehicle, trailer, motor home or any other rugged use vehicle, such as a dump truck.\u003cbr\u003e It mounts on any license plate with mounting holes 7 inch on center.  The stainless steel bracket mounts directly behind the license plate.  The polycarbonate housing extends out over the edge about two inches.\u003c\/p\u003e\n\u003cp\u003eUltra-bright white LED's are used to illuminate the license plate.  The housing also has three rear facing red LED's that can be wired as a third brake light when the license plate is mounted in the center of the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe wiring harness on this version is designed for use with the Motobilt Tag delete kits . MB1044-P, MB1047P, MB2025, and MB1077 which positions the Lite Plate Light in the center of the spare tire. The six foot harness features a connector for easy disconnection when removing the spare tire.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":45629885579418,"sku":"MB-MB1077-LD-PL6","price":194.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1077-LD-PL6-HJQL.jpg?v=1760968510"},{"product_id":"aluminum-crusher-2-rear-fenders-for-jeep-jk-jku","title":"Aluminum Crusher 2 Inch Rear Fenders for Jeep JK \/ JKU Motobilt","description":"\u003cp\u003eTired of those huge extra wide fenders? then set your Jeep JK apart from the rest with these 2 inch wide Jeep JK Rear Fenders. Made from 3\/16 Inch laser cutaluminum, they are ready for the toughest trails on earth.\u003c\/p\u003e\n\u003cp\u003eThe cutting edge design allows these fenders to fit perfectly and their raw finish means you can match them to your specific needs. No need to hope they match your setup as you can customize them for the perfect look.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep JK Crusher Series front fenders give you that ultra high clearance that you need for big tires but still have the look and protection of astrong aluminumfender flare.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep JK Rear Crusher SeriesFenders are a bolt on design. their design does allow an extra 1 inches to be removed from the factory fender well opening to be removed from the front and another 1 1\/2 inches in the back to accommodate larger tires if you choose.\u003c\/p\u003e\n\u003cp\u003eIncluded are a passenger and driver side rear fender flare and all of the necessary mounting hardware for the front of your 2007-2018 Jeep Wrangler JK or JKU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial 3\/16 aluminum\u003c\/li\u003e\n\u003cli\u003e2 inch flare\u003c\/li\u003e\n\u003cli\u003eRaw metal\u003c\/li\u003e\n\u003cli\u003eInner fender not included\u003c\/li\u003e\n\u003cli\u003eFits 2007-2018 Jeep Wrangler JK or JKU rear\u003c\/li\u003e\n\u003cli\u003eWeight: 12lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Parts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJK rear inner fenders part number MB1071\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46662812401818,"sku":"MB-MB1076-2-A","price":789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1076-2-A-HJQL.jpg?v=1760968776"},{"product_id":"hood-vent-kit-for-jeep-rubicon-jl-jlu-jt-motobilt","title":"Hood Vent Kit for Jeep Rubicon JL\/JLU\/JT Motobilt","description":"\u003cp\u003eIntroducing Motobilt's latest innovation: a game-changing solution designed exclusively for Jeep JL, JLU, and JT Rubicon Wranglers and Gladiators. Our all-new Motobilt Hood Vents are the ultimate upgrade to replace those factory plastic faux vents on your Jeep Rubicon's hood.\u003c\/p\u003e\n\u003cp\u003eUnlike those mere imitations, our vents are crafted from rugged aluminum, ensuring durability that stands up to off-road adventures.\u003c\/p\u003e\n\u003cp\u003eBut here's the real game-changer - these vents aren't just for show. Motobilt Hood Vents are designed with functionality in mind. They're engineered to let excess heat escape from your engine compartment, ensuring optimal heat dissipation.\u003c\/p\u003e\n\u003cp\u003eThis means your Jeep can stay cooler even during the most demanding off-road excursions, helping your engine perform at its best.\u003c\/p\u003e\n\u003cp\u003eCustomization is key, too. You have the option to leave these vents raw, embracing that industrial look, or paint them to match your Jeep's style for a personalized touch. Plus, we've thought of everything - our Motobilt Hood Vents come equipped with drip trays.\u003c\/p\u003e\n\u003cp\u003eSay goodbye to rainwater dripping straight onto the inner parts of your engine bay. We've got you covered, literally.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Jeep JL, JLU, or JT Rubicon Wrangler or Gladiator's style and performance with Motobilt Hood Vents - the real deal for off-road enthusiasts who demand the best.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHood Vent Kit for Jeep Rubicon JL\/JLU\/JT\u003c\/li\u003e\n\u003cli\u003eVents are crafted from rugged aluminum\u003c\/li\u003e\n\u003cli\u003eEngineered to let excess heat escape from your engine compartment, ensuring optimal heat dissipation\u003c\/li\u003e\n\u003cli\u003eMotobilt Hood Vents come equipped with drip trays- Say goodbye to rainwater dripping straight onto the inner parts of your engine bay. We've got you covered, literally.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675263455386,"sku":"MB-MB5536","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB5536-HJQL.jpg?v=1760968784"},{"product_id":"hood-vent-kit-for-jeep-jk-jku-motobilt","title":"Hood Vent Kit for Jeep JK\/JKU Motobilt","description":"\u003cp\u003eLet your Jeep breathe with our new Motobilt Hood Vent Kit designed specifically for 2007-2018 JK and JKU models. Motobilt Hood Vents are the ultimate upgrade to add style and functionality to those unvented JK and JKU hoods. These vents are crafted from rugged aluminum, ensuring durability that stands up to off-road adventures.\u003c\/p\u003e\n\u003cp\u003eBut here's the real game-changer - these vents aren't just for show. Motobilt Hood Vents are designed with functionality in mind. They're engineered to let excess heat escape from your engine compartment, ensuring optimal heat dissipation. This means your Jeep can stay cooler even during the most demanding off-road excursions, helping your engine perform at its best.\u003c\/p\u003e\n\u003cp\u003eCustomization is key, too. You have the option to leave these vents raw, embracing that industrial look, or paint them to match your Jeep's style for a personalized touch. Plus, our Motobilt Hood Vents come equipped with drip trays. Say goodbye to rainwater dripping straight onto the inner parts of your engine bay. We've got you covered, literally.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Jeep JK or JKU's style and performance with Motobilt Hood Vents - the real deal for off-road enthusiasts who demand the best.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675263848602,"sku":"MB-MB5537","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB5537-HJQL.jpg?v=1760968775"},{"product_id":"camera-mount-for-jeep-jl-mb1129-and-mb1132-for-jeep-jl-motobilt","title":"Camera Mount for Jeep JL MB1129 and MB1132 For Jeep JL Motobilt","description":"\u003cp\u003eThis bolt-on universal Jeep JL Camera Mount relocates your factory back-up camera and works with our MB1129 JK-JL License Plate Relocator\/Light Mount and MB1132 Tag\/License Plate Mount.\u003c\/p\u003e\n\u003cp\u003eThis 4 piece camera mount encloses and securely protects your factory Jeep JL back-up camera. The housing bolts to mating holes in our MB1129 and MB1132 products. This product can also be used as a universal bolt-on JL camera mount for a variety of custom applications as well.\u003c\/p\u003e\n\u003cp\u003eThe camera housing is constructed of durable 14 Ga formed steel. It has a removable back plate for accessing your camera during installation. Fasteners included. This camera mount ships bare steel and will need to be painted. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCamera Mount for Jeep JL MB1129 and MB1132\u003c\/li\u003e\n\u003cli\u003eFinish: Bare\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eHardware Included: Yes\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003cli\u003eFits: Jeep JL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675263881370,"sku":"MB-MB1130","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1130-HJQL.jpg?v=1760968601"},{"product_id":"jeep-jl-camera-mount-for-mb1115-for-18-pres-jeep-jl-jlu-motobilt","title":"Jeep JL Camera Mount for MB1115 For 18+ Jeep JL\/JLU Motobilt","description":"\u003cp\u003eHave JL or JLU? Not running a spare tire? Want to relocate your back up camera while running our super cool Tailgate Accessory Mount? If you've answered yes, yes and yes, then we have the perfect product for you.\u003c\/p\u003e\n\u003cp\u003eIf you haven't picked up our super cool Tailgate Accessory Mount (MB1115 sold separately), then now is the time add this to your cart too. Then you will be super cool too. Stand out from everyone else while customizing your new Jeep JL or JLU!\u003c\/p\u003e\n\u003cp\u003eOur bolt-on MB1122 JL Camera Mount is designed for form and function. This kit includes a multi-part, rugged metal camera housing that allows you to relocate your factory JL rear back up camera from its' factory position on the spare tire carrier to a lower and tighter location on the Tailgate Accessory Mount.\u003c\/p\u003e\n\u003cp\u003eWe have even adjusted and tested the angle of camera to ensure the guide lines on the dash screen are still aimed in the correct orientation and pitch while in reverse. Sometimes it's those little details that separate an average product from a superior product.\u003c\/p\u003e\n\u003cp\u003eMany Jeepers remove the spare tire, either for weight savings, additional views out the rear window or to provide extra departure angle clearance when off-roading. This JL Camera Mount will still allow you to use your rear back up camera while having the factory spare tire carrier removed. This product ships as bare steel. Fasteners included for assembly.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCamera Mount for MB1115 - fits Jeep JL\/JLU\u003c\/li\u003e\n\u003cli\u003eFinish: Bare\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eHardware Included: Yes\u003c\/li\u003e\n\u003cli\u003eSold As: Each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product is designed to be used in conjunction with MB1115 Tailgate Accessory Mount.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675263914138,"sku":"MB-MB1122","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1122-HJQL.jpg?v=1760968602"},{"product_id":"jeep-jk-rubicon-dana-44-front-axle-truss-motobilt","title":"Jeep JK Rubicon Dana 44 Front Axle Truss Motobilt","description":"\u003cp\u003ehe Motobilt Jeep JK Rubicon Dana 44 front axle truss is a great way to beef up the axle tubes on your Jeep JK and JK Unlimited. The Motobilt Jeep JK Rubicon Dana 44 front axle truss system is a quick way to add strength and style to your Jeep. The Motobilt truss wraps arount the stock upper passenger side link and extends out to both the driver and passenger side coil spring mounts for added strength throughout the length of the axle. You will see in some of the pictures that the truss fits very tight.\u003c\/p\u003e\n\u003cp\u003eWe have noticed some slight differences in the axles from Jeep. Some slight grinding may be required during the installation process. The top caps are CNC cut from 1\/4 inch high strength steel plate and is slotted to align the front and back vertical caps. The front and rear caps are CNC cut from 1\/8 inch inch high steel plate.\u003c\/p\u003e\n\u003cp\u003eThe plates are dimpled to add strength and cross section width to the parts. Essentially we can keep the axle a little lighter and make it look very cool with the dimple die holes. The kit includes a short and long side 1\/4 inch top cap, two 1\/4 inch vertical supports, and five 1\/8 inch front and back dimpled plates. This kit requires an experienced welder to install on the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK Rubicon Dana 44 front axle truss system\u003c\/li\u003e\n\u003cli\u003eTop caps are CNC cut from 1\/4 inch high strength steel plate\u003c\/li\u003e\n\u003cli\u003eFront and rear caps are CNC cut from 1\/8 inch high steel plate\u003c\/li\u003e\n\u003cli\u003eIncludes short and long side 1\/4 inch top cap and 2 1\/4 inch vertical supports and 5 1\/8 inch front and back dimpled plates\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires 3 inch bump stop extensions to keep the truss from contacting the oil pan. Bump stop extensions would be used to keep larger tires like 35 and up from contacting the fenders when articulated\u003c\/li\u003e\n\u003cli\u003eThis kit requires an experienced welder to install on the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675263946906,"sku":"MB-MB4027","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4027_13-HJQL.jpg?v=1760968462"},{"product_id":"14-bolt-rear-axle-truss-for-4-inch-dia-tubes-motobilt","title":"14 Bolt Rear Axle Truss for 4 Inch Dia Tubes Motobilt","description":"\u003cp\u003eBuilding a rear 4 link suspension on a custom 14 Bolt axle assembly with 4 inch axle tubes does not have to be difficult. The Motobilt truss offers a heavy duty solution to this application. The truss main body is laser cut and formed from 1\/2 inch thick steel plate. The pinion guard is made from laser cut and formed 3\/8 inch steel plate. The plate gussets for the truss are 3\/16 inch steel plate.\u003c\/p\u003e\n\u003cp\u003eThis kit is shipped unwelded. The installer will need to assembly and weld into place on the axle assembly. В Holes for vent tubes will need to be drilled in the location you want.  Some trimming of the gusset plates may be needed if installing an ARB Airlocker.\u003c\/p\u003e\n\u003cp\u003e14 Bolt center sections with the ribs will need to be slightly clearanced with a grinder on the top to allow the truss to sit all the way down on the axle tunes. Longer bolts for the pinion support are included with the kit. \u003c\/p\u003e\n\u003cp\u003eDepending on the center casting some trimming may be needed on the 3\/16 inchplate gussets for them to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Truss is Desined to fit custom axle assemblies That have been upgraded to 4 inch Diameter Axle Tubes. Axles pulled from fatory vehicles will not work. \u003c\/strong\u003e\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264012442,"sku":"MB-MB4094","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4094-HJQL.jpg?v=1760968720"},{"product_id":"chevy-dana-60-front-axle-truss-and-steering-mount-motobilt","title":"Chevy Dana 60 Front Axle Truss and Steering Mount Motobilt","description":"\u003cp\u003eChevy full width Dana 60 Axle Truss System with integrated double ended steering ram mount. The Motobilt Chevy Dana 60 axle truss is laser cut and bent out of 3\/8 inch high strength steel for the main structure. The truss spans the length of the axle, and is included in an integrated hydraulic ram mount for full hydraulic steering.\u003c\/p\u003e\n\u003cp\u003eThe design is meant for a 2.5 inch double ended ram. The ram is completely protected from underneath with a full skid plate to keep it safe from rocks. The truss and steering ram mount are tied in together and a mount for a small clevis shackle is located on the front center of the steering ram mount. This mount is used to connect your winch to be used as a Suck Down winch point.\u003c\/p\u003e\n\u003cp\u003eThe entire system is designed with keyway fitments to ensure a true and straight forward install. Removable skid plate for diff cover is included for ease of access into the differential.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevy full width Dana 60 Axle Truss\u003c\/li\u003e\n\u003cli\u003eLaser cut 3\/8 inch high strength steel for the main structure\u003c\/li\u003e\n\u003cli\u003eRemovable skid plate for diff cover is included\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe have additional mounts for coilovers, link tabs, and hydraulic steering rams available for purchase separately and are not included with this kit\u003c\/li\u003e\n\u003cli\u003eProfessional welding is required to install this system properly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264045210,"sku":"MB-MB4004","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4004-HJQL.jpg?v=1760968463"},{"product_id":"f-250-f-350-super-duty-dana-60-axle-truss-and-steering-mount-05-present-motobilt","title":"F-250\/F-350 Super Duty Dana 60 Axle Truss and Steering Mount 05-Present Motobilt","description":"\u003cp\u003eThe Motobilt Ford Super Duty Dana 60 axle truss is laser cut and bent out of 3\/8 inch high strength steel for the main structure. This kit was designed specifically for the 2005 and up Ford F-250 and F350 Dana 60 front axles.\u003c\/p\u003e\n\u003cp\u003eThe truss spans the length of the axle, and includes in an integrated hydraulic ram mount for full hydraulic steering. The design is meant for a 2.5 inch-2.75 inch double ended ram. The ram is completely protected from underneath with a full skid plate to keep it safe from rocks.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/8 Inch\u003c\/li\u003e\n\u003cli\u003eThis new kit consists of a full length axle truss and integrated steering ram mount. The main truss is made from massive 3\/8 inch thick steel plate that is both laser cut and cnc bent for a precise fit. There is significant bracing internally with the use of 3\/8 inch and 3\/16 inch thick mounts.\u003c\/li\u003e\n\u003cli\u003eNot only is your axle going to have superior strength it will also have a high clearance mount to protect your 2.5 inch-2.75 inch double ended steering ram. This mount allows you to tuck the ram up out of harms way and is completely protected with 1\/4 inch thick CNC bent steel plate.\u003c\/li\u003e\n\u003cli\u003eOn top connecting the truss to the front of the steering ram mount is a bracket that provides extra strength and serves as a winch suck down point. A small d ring shackle can be mounted here so that you can attach your winch to it when attempting those extreme climbs. Once you attach and pull the winch tight you decrease your chances of the rig unloading on those steep ledges.\u003c\/li\u003e\n\u003cli\u003eAnother awesome option provided are the 2 holes on each end of the truss. These holes can also act as points for a small d ring to be attached.\u003c\/li\u003e\n\u003cli\u003eWhen designing the steering ram mount we paid special attention to make sure that the ram was placed optimally to work with correctly with after market steering arms.\u003c\/li\u003e\n\u003cli\u003eA removable skid plate around the differential cover allows for full accessibility to work on your differential.\u003c\/li\u003e\n\u003cli\u003eWe have additional mounts for coil overs, link tabs, and hydraulic steering rams available for purchase separately and are not included with this kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Professional welding is required to install this system properly.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264471194,"sku":"MB-MB4072","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4072-HJQL.jpg?v=1760968496"},{"product_id":"gladiator-ud60-rear-truss-motobilt","title":"Gladiator UD60 Rear Truss Motobilt","description":"\u003cp\u003eThe Motobilt MB4083 JT Gladiator Ultimate Dana 60 Rear Axle Truss is a beefy upgrade to an already beefy aftermarket rear axle. The kit is constructed using a heavy duty 4-1\/2 wide x 3\/8 inch thick top flange spanning between each brake rotor.\u003c\/p\u003e\n\u003cp\u003eThe top plate has a cutout for access to the UD60 axle breather. The top plate is connected to the axle via Two (2) 3\/16 inch thick vertical steel web plates. Both web plates are precision scribed to the unique cast housing of the UD60 axle to ensure an accurate fit and to facilitate a precision weld for added strength.\u003c\/p\u003e\n\u003cp\u003eAll pivot plates designed for the Gladiator's stock rear suspension arms and are constructed using 1\/4 inch thick high grade steel and feature keyed tabs and slots for a precision fit. Included are a pair of heavy duty rear lower shock mounts constructed from 1\/4 inch steel plates. All plates are laser etched with a part number and we provide you with an assembly drawing which locates each plate and it inchs corresponding placement on the UD60 rear axle.\u003c\/p\u003e\n\u003cp\u003eThe integrated spring perches are designed to perfectly align with stock or aftermarket springs and feature a pair of bolt-on spring retainer plates with 3\/8 inch Grade 8 fasteners and machined weld nuts. The integrated bump stop flats include mounting points for the stock wheel sensor brackets and allow you to add upgraded aftermarket bump stops, if desired.\u003c\/p\u003e\n\u003cp\u003eWe have even included a pair of heavy duty brake cable mounts. We have repositioned the stock rear sway bar mounts by relocating it 1 inch rearward. This provides clearance for an aftermarket heavy duty rear differential cover, like our available Motobilt MB4010 Dana 60 Diff Cover (sold separately). We have included Four (4) 3\/8 inchќ UNC machined weld nuts for easy fastening of the stock rear sway bar.\u003c\/p\u003e\n\u003cp\u003eThis kit is shipped unwelded. Welding is required. We recommend welding be performed by a qualified professional welder. Weight = 66 lbs\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe top plate has a cutout for access to the UD60 axle breather\u003c\/li\u003e\n\u003cli\u003eThe top plate is connected to the axle via Two (2) 3\/16 inch thick vertical steel web plates\u003c\/li\u003e\n\u003cli\u003eAll pivot plates designed for the Gladiator inchs stock rear suspension arms\u003c\/li\u003e\n\u003cli\u003ePair of heavy duty rear lower shock mounts\u003c\/li\u003e\n\u003cli\u003eIncludes Four (4) 3\/8 inch UNC machined weld nuts for easy fastening of the stock rear sway bar\u003c\/li\u003e\n\u003cli\u003eThis kit is shipped unwelded. Welding is required.\u003c\/li\u003e\n\u003cli\u003eWe recommend welding be performed by a qualified professional welder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264667802,"sku":"MB-MB4083","price":519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4083-HJQL.png?v=1760968578"},{"product_id":"14-bolt-one-ton-conversion-truss-w-pinion-guard-for-jeep-jk-rear-motobilt","title":"14 Bolt One Ton Conversion Truss w\/ pinion guard for Jeep JK Rear Motobilt","description":"\u003cp\u003eThe Motobilt Jeep JK rear 1 ton axle swap with pinion guard makes installing a beefy rear axle in your Jeep a breeze. When designing our kit we wanted it to be easy to install. Whether you are a professional shop or are a DIY fabricator at home, this kit will save you time and money. Our kit spans much further across the axle than other kits on the market.\u003c\/p\u003e\n\u003cp\u003eThis allowed us to incorporate the spring mounts into the truss. You will simply bolt the pinion support onto the axle and then set all of the other components onto the top. With the aligning tabs and slots, the installation is foolproof.\u003c\/p\u003e\n\u003cp\u003eThe kit was designed to work with the GM 14 bolt rear axle that was found in 1996-2006 GM 2500 and 3500 Single Rear Wheel axle trucks. The wheel mounting surface (WMS) will be 68 inches wide and the casting on the center differential has lots of ribbing.\u003c\/p\u003e\n\u003cp\u003eDo not use an axle from a van as the differential is offset. When installing this axle, remember that you will need to address things such as the 8x6.5 bolt pattern vs. the Jeep's factory 5x5 bolt pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK Rear 1 Ton axle swap with pinion guard\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the GM 14 bolt rear axle that was found in 1996-2006 GM 2500 and 3500 Single Rear Wheel axle trucks\u003c\/li\u003e\n\u003cli\u003eThe axle truss ships raw steel and will require professional welding\u003c\/li\u003e\n\u003cli\u003eLaser cut and CNC formed from 1\/4 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eIntegrated coil spring mounts with truss\u003c\/li\u003e\n\u003cli\u003eEasy install with no measurements needed\u003c\/li\u003e\n\u003cli\u003eTrack bar includes 4 mounting locations in case you change up your suspension\u003c\/li\u003e\n\u003cli\u003eMain truss body is one solid piece with several support beams made of 1\/4 inch steel plate\u003c\/li\u003e\n\u003cli\u003eCoil spring mounts have a built-in threaded nut to use with a spring retainer\u003c\/li\u003e\n\u003cli\u003eUpper and lower link mounts are formed so that your suspension is still in alignment once the wider axles are installed\u003c\/li\u003e\n\u003cli\u003eCan easily be changed if you want to run a custom suspension design\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe pinion guard will hit the factory gas tank unless you stretch the wheelbase and move the rear axle back or relocate the gas tank.\u003c\/li\u003e\n\u003cli\u003eOptional HD steel diff cover (MB4012) is NOT included.\u003c\/li\u003e\n\u003cli\u003eBrake components such as the tone rings and ABS sensors will need to be addressed as they are not included in this kit\u003c\/li\u003e\n\u003cli\u003eAxle assembly shown is NOT included and is only shown for demonstration purposes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264700570,"sku":"MB-MB4058","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4058-HJQL.jpg?v=1760968804"},{"product_id":"trail-truss-for-rear-ecgs-dana-80-motobilt","title":"Trail Truss for Rear ECGS Dana 80 Motobilt","description":"\u003cp\u003eElevate your off-road experience with the MB4123 Trail Truss, expertly crafted for the Rear ECGS Dana 80 axle. This trail-ready truss is made from heavy-duty 3\/8 inch thick steel, engineered to withstand the toughest conditions and enhance your vehicle's performance.\u003c\/p\u003e\n\u003cp\u003eWhether you're tackling rugged trails or embarking on a cross-country adventure, the MB4123 provides the reliability you need. The included differential cover not only adds an extra layer of protection but also brings a sleek, integrated look to your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA: Proudly designed and manufactured in the USA, ensuring premium quality and performance.\u003c\/li\u003e\n\u003cli\u003eRobust Construction: Built from 3\/8 inch thick steel truss, offering unparalleled durability and strength.\u003c\/li\u003e\n\u003cli\u003eHydraulic Ram Compatibility: Compatible with PSC hydraulic rams ranging from 2.25 inch to 2.75 inch, providing versatile setup options.\u003c\/li\u003e\n\u003cli\u003eIntegrated Differential Cover: Comes with a differential cover to protect your differential from harsh offroad conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for the ECGS\/Fusion Rear Axle Dana 80, guaranteeing a perfect fit and optimal functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 7.4 inch Height x 26.5 inch Width x 7.4 inch Depth\u003c\/li\u003e\n\u003cli\u003eWeight: 29.6 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264733338,"sku":"MB-MB4123","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4123-HJQL.png?v=1760968828"},{"product_id":"axle-truss-with-steering-ram-mount-for-ecgs-14-bolt-rear-steer-motobilt","title":"Axle Truss with Steering Ram Mount for ECGS 14 Bolt Rear Steer Motobilt","description":"\u003cp\u003eThe Motobilt MB4119 Axle Truss with Steering Ram Mount is the ultimate upgrade for off-road enthusiasts who demand the best in durability and functionality. Ideal for vehicles equipped with full hydraulic steering systems, this truss ensures your axle is prepared for extreme off-roading. The added pinion guard and skid plate protect critical components from trail hazards, while the robust steel construction provides a rigid, non-flexing mount for your steering ram.\u003c\/p\u003e\n\u003cp\u003eTransform your ECGS 14 Bolt rear steer axle into a rock-solid foundation for any adventure with the MB4119 Axle Truss. Whether you're rock crawling or navigating through challenging terrain, this truss system provides the reliability and performance you need to take on any obstacle with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Hydraulic Steering Ram Mount: Integrates seamlessly with your hydraulic steering system to provide robust, reliable steering control under the most demanding conditions.\u003c\/li\u003e\n\u003cli\u003eRemovable Skid Plate Around Diff Cover: Offers added protection to your differential, crucial for shielding against rocks and debris while on the trail.\u003c\/li\u003e\n\u003cli\u003ePinion Guard: Safeguards the pinion area from impacts and abrasions, enhancing the durability and longevity of your axle assembly.\u003c\/li\u003e\n\u003cli\u003e3\/8 inch Thick Steel Truss: Constructed from heavy-duty steel for maximum strength and resistance to flexing and bending.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for ECGS Rear Steer 14B axles, ensuring a perfect fit and optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA: Proudly designed and manufactured in the USA, ensuring top-quality craftsmanship and materials.\u003c\/li\u003e\n\u003cli\u003eDimensions: Height: 13.5 inches, Width: 38.5 inches, Depth: 28.25 inches.\u003c\/li\u003e\n\u003cli\u003eSteering Ram: Not only is your axle going to have superior strength it will also have a high clearance mount to protect your 2.25 inch, 2.5 inch or 2.75 inch double ended steering ram. This mount allows you to tuck the ram up out of harm's way and is completely protected with 1\/4 inch thick CNC bent steel plate.\u003c\/li\u003e\n\u003cli\u003eWinch Suck Down: On top connecting the truss to the front of the steering ram mount is a bracket that provides extra strength and serves as a winch suck down point. A small d ring shackle can be mounted here so that you can attach your winch to it when attempting those extreme climbs. Once you attach and pull the winch tight you decrease your chances of the rig unloading on those steep ledges.\u003c\/li\u003e\n\u003cli\u003eWeight: 83 lbs, providing substantial reinforcement without compromising axle functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUpgrade Today:\u003c\/strong\u003e\u003cbr\u003eReady to take your off-road performance to the next level? Add the MB4119 Axle Truss with Steering Ram Mount to your setup and experience the difference that quality, American-made engineering can make. Fortify your vehicle for the toughest challenges ahead.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264766106,"sku":"MB-MB4119","price":589.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4119_3-HJQL.png?v=1760968817"},{"product_id":"front-axle-truss-for-fusion-ecgs-14-bolt-axle-motobilt","title":"Front Axle Truss for Fusion\/ECGS 14 Bolt Axle Motobilt","description":"\u003cp\u003eStrengthen your off-road rig with the MB4117 Front Axle Truss, specifically designed for the Fusion and ECGS 14 Bolt Front Axles with 4 inch axle tubes. This robust axle truss is the ultimate reinforcement for your vehicle, ensuring unparalleled durability and support in the most demanding off-road conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Hydraulic Steering Ram Mount: Integrates seamlessly with your hydraulic steering system to provide robust, reliable steering control under the most demanding conditions.\u003c\/li\u003e\n\u003cli\u003eRemovable Skid Plate Around Diff Cover: Offers added protection to your differential, crucial for shielding against rocks and debris while on the trail.\u003c\/li\u003e\n\u003cli\u003ePinion Guard: Safeguards the pinion area from impacts and abrasions, enhancing the durability and longevity of your axle assembly.\u003c\/li\u003e\n\u003cli\u003e3\/8 inch Thick Steel Truss: Constructed from heavy-duty steel for maximum strength and resistance to flexing and bending.\u003c\/li\u003e\n\u003cli\u003eFits:\u003c\/li\u003e\n\u003cli\u003eFusion 14 Bolt Front Axle\u003c\/li\u003e\n\u003cli\u003eECGS 14 Bolt Front Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCrafted for those who push their vehicles to the limits, this front axle truss is essential for anyone looking to upgrade their axle's resilience and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProudly Made in the USA: Manufactured with precision and care, ensuring the highest quality and reliability for your off-road adventures.\u003c\/li\u003e\n\u003cli\u003eRobust Construction: Designed to provide superior strength and support, minimizing axle flex and preventing damage under extreme conditions.\u003c\/li\u003e\n\u003cli\u003eDimensions: Measuring 14.5 inch in height, 43.75 inch in width, and 26.5 inch in depth, this truss is built to cover the entire axle for maximum protection.\u003c\/li\u003e\n\u003cli\u003eSteering Ram: Not only is your axle going to have superior strength it will also have a high clearance mount to protect your 2.25 inch, 2.5 inch or 2.75 inch double ended steering ram. This mount allows you to tuck the ram up out of harms way and is completely protected with 1\/4 inch thick CNC bent steel plate.\u003c\/li\u003e\n\u003cli\u003eWinch Suck Down: On top connecting the truss to the front of the steering ram mount is a bracket that provides extra strength and serves as a winch suck down point. A small d ring shackle can be mounted here so that you can attach your winch to it when attempting those extreme climbs. Once you attach and pull the winch tight you decrease your chances of the rig unloading on those steep ledges.\u003c\/li\u003e\n\u003cli\u003eWeight: Weighing in at 91.5 lbs, it's a testament to its solid construction and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe MB4117 Front Axle Truss is not just a part; it's an investment in the longevity and performance of your off-road vehicle. Whether you're tackling rocky trails or conquering mud pits, this axle truss ensures your front axle has the reinforcement it needs to handle whatever comes its way.\u003c\/p\u003e\n\u003cp\u003eUpgrade your vehicle with the MB4117 Front Axle Truss and experience the confidence that comes with having the best in axle protection.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264864410,"sku":"MB-MB4117","price":589.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4117_4-HJQL.png?v=1760968818"},{"product_id":"14-bolt-competition-axle-truss-motobilt","title":"14 Bolt Competition Axle Truss Motobilt","description":"\u003cp\u003ehe Motobilt Competion Axle Truss is the ultimate in strength. It is basically a truss within a truss. Added strength is needed in larger tire applications for rock crawling, rock bouncing, and those who like to push it. Motobilt has been fabricating the 14 Bolt Competition Axle Truss since 2013.\u003c\/p\u003e\n\u003cp\u003eThis particular axle truss is the definition of heavy duty. This version of the 14 bolt truss is essentially two trusses in one. If you notice, in the center over the diff there is a truss over the top of the casting, which is basically a trail version 14 Bolt axle truss that you can weld link tabs to. We've gone much further with our 14 Bolt Competition Axle Truss. It has a 3\/8 inch thick truss with internal gusseting covering the lower section and extending out to the ends of the housing. We stopped just short of the end to allow room for the installer to weld the truss in place.\u003c\/p\u003e\n\u003cp\u003eThe truss is shipped with the a pinion support and pinion guard. The pinion support ties the cast center section to the axle tubes to eliminate the axle tubes from spinning in the cast housing. This is a very common problem with trusses that do not tie to the diff cover or the pinion support. The 14 bolt pinion guard will clear a 1410 u-joint. The top of the truss allows for plenty of room to mount upper links in a 3 or 4 link suspension.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e14 Bolt Competition Axle Truss\u003c\/li\u003e\n\u003cli\u003e3\/8 inch thick truss\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe truss is shipped with the a pinion support and pinion guard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264897178,"sku":"MB-MB4003","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4003-HJQL.jpg?v=1760968465"},{"product_id":"jeep-jk-1-ton-swap-truss-kit-super-duty-dana-60-motobilt","title":"Jeep JK 1 Ton Swap Truss Kit Super Duty Dana 60 Motobilt","description":"\u003cp\u003eThe Jeep JK 1 ton axle swap kit allows you to use a 2005 and up Ford Super Duty Dana 60 front axle and install it into a Jeep Wrangler JK. It consists of a truss, upper link mounts, lower link mounts, coil spring buckets, adjustable track bar mount for the axle, track bar mount for the frame, and sway bar end link mounts. The main body of the truss is made from 1\/4 inch thick steel plate that is laser cut and CNC formed in house at Motobilt. We then brace the length of the truss with 1\/4 inch beams that closely follow every contour of the axle. Another key feature that sets us apart is the integrated and low profile diff cover. This low profile cover will work with the huge steering that comes on these 1 ton axles, yet still provides you ultimate protection. With our kit there is no measuring needed. You simply bolt the diff cover up and everything will go in place like it should. Instead of using bushings in the top, we have a flexible and rebuildable johnny joint for both upper links.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK 1 ton axle swap kit\u003c\/li\u003e\n\u003cli\u003eThis kit allows you to use a 2005 and up Ford Super Duty Dana 60 front axle and install it into a Jeep Wrangler JK\u003c\/li\u003e\n\u003cli\u003e1\/4 inch laser cut and cnc formed\u003c\/li\u003e\n\u003cli\u003eQuick and easy no-measure install\u003c\/li\u003e\n\u003cli\u003eLow profile steel diff cover\u003c\/li\u003e\n\u003cli\u003eTrack bar mounts for both the frame and axle\u003c\/li\u003e\n\u003cli\u003eLower control arm mounts\u003c\/li\u003e\n\u003cli\u003eUpper control arm mounts with Currie Johnny Joints.\u003c\/li\u003e\n\u003cli\u003eSway bar end link mounts\u003c\/li\u003e\n\u003cli\u003eLow profile diff cover that will clear the steering\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264929946,"sku":"MB-MB4059","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4059-HJQL.jpg?v=1760968468"},{"product_id":"axle-truss-with-steering-ram-for-rear-ecgs-dana-80-motobilt","title":"Axle Truss with Steering Ram for Rear ECGS Dana 80 Motobilt","description":"\u003cp\u003eElevate your off-road experience with the MB4122 Axle Truss, expertly designed for the ECGS Dana 80 rear steer axle. This high-performance upgrade is essential for integrating a full hydraulic steering system, dramatically enhancing steering precision and vehicle handling on challenging terrains.\u003c\/p\u003e\n\u003cp\u003eEquipped with a full hydraulic ram mount and a heavy-duty removable skid plate, it offers protection for critical undercarriage components while allowing easy access for adjustments and repairs. Built from robust 3\/8 inch thick steel, this axle truss ensures your vehicle is ready to tackle any adventure with confidence.\u003cbr\u003e\u003cstrong\u003eKey Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA: Proudly crafted in the USA, reflecting unmatched quality and performance.\u003c\/li\u003e\n\u003cli\u003eFull Hydraulic Steering Ram Mount: Specifically designed to securely fit hydraulic steering rams, enhancing steering control and reliability.\u003c\/li\u003e\n\u003cli\u003eRemovable Skid Plate: Includes a durable skid plate strategically placed around the differential cover, which can be easily removed for maintenance and inspections.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Made from 3\/8 inch thick steel truss, this truss provides exceptional strength and durability, even under extreme off-road conditions.\u003c\/li\u003e\n\u003cli\u003eRam Compatibility: Compatible with PSC hydraulic rams ranging from 2.25 inch to 2.75 inch, offering adaptability for various off-road setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision Fit: Specifically tailored for the ECGS\/Fusion Rear Steer Axle Dana 80 with 4 inch axle tubes, ensuring a seamless fit and optimal functionality.\u003c\/li\u003e\n\u003cli\u003eIncludes Differential Cover: Comes with a differential cover to further protect and enhance your axle setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 10.4 inch Height x 38.5 inch Width x 15.7 inch Depth\u003c\/li\u003e\n\u003cli\u003eWeight: 66.3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264962714,"sku":"MB-MB4122","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4122-HJQL.png?v=1760968826"},{"product_id":"axle-truss-with-steering-ram-for-front-ecgs-dana-80-motobilt","title":"Axle Truss with Steering Ram for Front ECGS Dana 80 Motobilt","description":"\u003cp\u003eUpgrade your off-road vehicle with the MB4121 Axle Truss, meticulously engineered for the Front ECGS Dana 80 axle. This pivotal upgrade not only bolsters your vehicle's steering capabilities through a secure mount for a full hydraulic steering ram but also fortifies it against the harshest conditions with a robust 3\/8 inch thick steel truss.\u003c\/p\u003e\n\u003cp\u003eDesigned to ensure your rig's reliability on any terrain, it includes a removable skid plate that provides essential protection for the included differential cover, allowing for easy access during maintenance or upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA: Expertly crafted to deliver unmatched quality and reliability.\u003c\/li\u003e\n\u003cli\u003eFull Hydraulic Steering Ram Mount: Specially tailored to support a wide range of hydraulic steering rams, enhancing steering precision and performance.\u003c\/li\u003e\n\u003cli\u003eRemovable Skid Plate: Features a protective skid plate around the included differential cover, which can be easily removed for straightforward maintenance.\u003c\/li\u003e\n\u003cli\u003eRobust Construction: Constructed from a 3\/8 inch thick steel truss, this axle truss stands up to tough off-road conditions, offering exceptional durability and strength.\u003c\/li\u003e\n\u003cli\u003eVersatile Compatibility: Compatible with PSC hydraulic rams from 2.25 inch to 2.75 inch, ensuring flexibility across various setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTailored Fit: Perfectly aligns with ECGS\/Fusion Front Axle Dana 80 with 4 inch axle tubes, promising seamless integration and optimal functionality.\u003c\/li\u003e\n\u003cli\u003eIncludes Differential Cover: Comes with a differential cover to enhance protection and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 10.5 inch Height x 43.8 inch Width x 15.7 inch Depth\u003c\/li\u003e\n\u003cli\u003eWeight: 82.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675264995482,"sku":"MB-MB4121","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB4121-HJQL.png?v=1760968825"},{"product_id":"jeep-jk-front-bumper-07-18-wrangler-jk-hatchet-series-bare-steel-motobilt","title":"Jeep JK Front Bumper 07-18 Wrangler JK Hatchet Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. This Hatchet configuration is the base model. The Hatchet includes 3\/4 inch thick steel D-Ring mounts that pass through the bumper and are welded inside and out for superior strength. The Hatchet is a total of 41 inch wide which allows for closer approach angles.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHatchet Jeep JK front bumper\u003c\/li\u003e\n\u003cli\u003eTotal of 41 inch wide\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003e2012 and newer models require frame modification and vacuum pump relocation is required in Jeep JK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265126554,"sku":"MB-MB1048","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1048-HJQL.jpg?v=1760968422"},{"product_id":"jeep-jk-front-bumper-w-fogs-07-18-wrangler-jk-hatchet-series-bare-steel-motobilt","title":"Jeep JK Front Bumper W\/Fogs 07-18 Wrangler JK Hatchet Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper with fog light holes is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. The Hatchet includes 3\/4 inch thick steel d-ring mounts that pass through the bumper and our welded inside and out for superior strength. The Hatchet is a total of 41 inch wide which allows for closer approach angles.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHatchet Jeep JK front bumper with fog light holes\u003c\/li\u003e\n\u003cli\u003eTotal of 41 inch wide\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis Hatchet configuration comes with fog light holes and integrated mounts for your factory fog lights\u003c\/li\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003e2012 and newer models frame modification required and vacuum pump relocation is required in Jeep JK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265355930,"sku":"MB-MB1048F","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1048F-HJQL.jpg?v=1760968420"},{"product_id":"jeep-jk-front-bumper-w-stinger-07-18-wrangler-jk-hatchet-series-bare-steel-motobilt","title":"Jeep JK Front Bumper W\/Stinger 07-18 Wrangler JK Hatchet Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper with Stinger is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. This Hatchet configuration includes a stinger made from 1.75 inch DOM steel tube with integrated gussets. It has holes to mount your winch. The Hatchet includes 3\/4 inch thick steel D-Ring mounts that pass through the bumper and our welded inside and out for superior strength. The Hatchet is a total of 41 inch wide which allows for closer approach angles.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHatchet Jeep JK front bumper with stinger\u003c\/li\u003e\n\u003cli\u003eStinger made from 1.75 inch DOM steel tube with integrated gussets\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003eHatcher is 41 inches wide\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2012 and newer Jeep JK frame modification required and vacuum pump relocation is required PN MB2060\u003c\/li\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265388698,"sku":"MB-MB1048-S","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1048-S-HJQL.jpg?v=1760968415"},{"product_id":"jeep-jk-front-bumper-w-stinger-fog-cutouts-07-18-wrangler-jk-hatchet-series-bare-steel-motobilt","title":"Jeep JK Front Bumper W\/Stinger Fog Cutouts 07-18 Wrangler JK Hatchet Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. This Hatchet configuration features integrated factory or aftermarket LED fog lights and a stinger option. The Hatchet is a total of 41 inch wide which allows for closer approach angles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHatchet Jeep JK front bumper with stinger\u003c\/li\u003e\n\u003cli\u003eTotal of 41 inch wide\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003e2012 and newer models requires frame modification and vacuum pump relocation in Jeep JK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265421466,"sku":"MB-MB1048F-S","price":589.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1048F-S-HJQL.jpg?v=1760968419"},{"product_id":"jeep-jk-front-bumper-07-18-wrangler-jk-w-fog-light-holes-the-hammer-series-bare-steel-motobilt","title":"Jeep JK Front Bumper 07-18 Wrangler JK W\/Fog Light Holes The Hammer Series Bare Steel Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JK The Hammer front bumper. It features built in provisions for factory style fog lights. The Motobilt Jeep JK Front The Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper\u003c\/li\u003e\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately\u003c\/li\u003e\n\u003cli\u003eLED fog light sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265487002,"sku":"MB-MB1025F","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1025F-HJQL.jpg?v=1760968427"},{"product_id":"jeep-jk-front-bumper-07-18-wrangler-jk-crusher-series-bare-steel-motobilt","title":"Jeep JK Front Bumper 07-18 Wrangler JK Crusher Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Jeep Wrangler JK Crusher recessed winch bumper will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The high clearance design includes a built in skid plate also. The bumper is made from 3\/16 inch thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3\/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength.\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK front Crusher recessed winch bumper\u003c\/li\u003e\n\u003cli\u003eMeasures in at just 46.5 inch at its widest point\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out\u003c\/li\u003e\n\u003cli\u003eIncludes all the necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003eWill Not work with Teraflex S\/T Dual rate front sway bar\u003c\/li\u003e\n\u003cli\u003eThe outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts\u003c\/li\u003e\n\u003cli\u003eShips bare metal and will need to be painted or powdercoated once you receive it\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump PN MB2060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265519770,"sku":"MB-MB1011","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1011-HJQL.jpg?v=1760968432"},{"product_id":"jeep-jl-gladiator-front-bumper-18-wrangler-jl-gladiator-w-fog-light-holes-the-hammer-series-motobilt","title":"Jeep JL\/Gladiator Front Bumper 18+ Wrangler JL\/Gladiator W\/Fog Light Holes The Hammer Series Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JL Hammer front bumper with Fog Light Holes. It features built in provisions for factory style fog lights. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA.\u003c\/p\u003e\n\u003cp\u003eOur JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate.\u003c\/p\u003e\n\u003cp\u003eThe ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper\u003c\/li\u003e\n\u003cli\u003eFits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited\u003c\/li\u003e\n\u003cli\u003eFits 2020 and newer Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use.\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JL\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately. See Related Parts.\u003c\/li\u003e\n\u003cli\u003eLED fog light Not included, but sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265618074,"sku":"MB-MB1090F","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1090F-HJQL.jpg?v=1760968523"},{"product_id":"jeep-jl-gladiator-front-bumper-with-skid-plate-18-wrangler-jl-gladiator-w-fog-light-holes-the-hammer-series-motobilt","title":"Jeep JL\/Gladiator Front Bumper With Skid Plate 18+ Wrangler JL\/Gladiator W\/Fog Light Holes The Hammer Series Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JL Hammer front bumper with skid plate and fog light holes. It features built in provisions for factory style fog lights and the skid plate is laser cut from 3\/16 inch P and O steel and formed on a press brake.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body\u003c\/p\u003e\n\u003cp\u003e. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle.\u003c\/p\u003e\n\u003cp\u003eThe main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JL Hammer 48.5 inch front bumper wth skid plate.\u003c\/li\u003e\n\u003cli\u003eFits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited\u003c\/li\u003e\n\u003cli\u003e2020 and newer Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use.\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JL\u003c\/li\u003e\n\u003cli\u003eLED fog light NOT included, but sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265912986,"sku":"MB-MB1090F-MB1094","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1090F-MB1094-HJQL.png?v=1760968522"},{"product_id":"hammer-series-front-bumper-w-stinger-for-07-18-jeep-jk-jku-motobilt","title":"Hammer Series Front Bumper w\/Stinger for 07-18 Jeep JK\/JKU Motobilt","description":"\u003cp\u003eThe Motobilt Jeep JK Front The Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited.\u003c\/p\u003e\n\u003cp\u003eThe front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx. 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen.\u003c\/p\u003e\n\u003cp\u003eThe ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate.\u003c\/p\u003e\n\u003cp\u003eThe bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper with stinger\u003c\/li\u003e\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003eShips bare steel\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266011290,"sku":"MB-MB1025-S","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1025-S-HJQL.jpg?v=1760968745"},{"product_id":"jeep-jk-bumper-w-stinger-07-18-wrangler-jk-the-hammer-series-bare-steel-motobilt","title":"Jeep JK Bumper W\/Stinger 07-18 Wrangler JK The Hammer Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Jeep JK Front The Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper with stinger\u003c\/li\u003e\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately\u003c\/li\u003e\n\u003cli\u003eLED fog lights sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266044058,"sku":"MB-MB1025F-S","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1025F-S-HJQL.jpg?v=1760968424"},{"product_id":"jeep-jk-front-bumper-w-stinger-07-18-wrangler-jk-crusher-series-bare-steel-motobilt","title":"Jeep JK Front Bumper W\/Stinger 07-18 Wrangler JK Crusher Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Jeep Wrangler JK Crusher recessed winch bumper with stinger will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The stinger bar is made out of 1.75 inch x .120 inch wall DOM tube and is braced with laser cut gussets. The high clearance design includes a built in skid plate also. The bumper is made from 3\/16 inch thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3\/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK front Crusher recessed winch bumper with stinger\u003c\/li\u003e\n\u003cli\u003eMeasures in at just 46.5 inch at its widest point\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick laser cut d-ring mounts that pass through the bumper and our welded both inside and out\u003c\/li\u003e\n\u003cli\u003eThe stinger bar is made out of 1.75 inch x .120 inch wall DOM tube and braced with laser cut gussets\u003c\/li\u003e\n\u003cli\u003eIncludes all the necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003eWill Not work with Teraflex S\/T Dual rate front sway bar\u003c\/li\u003e\n\u003cli\u003eThe outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts\u003c\/li\u003e\n\u003cli\u003eShips bare steel and will need to be painted or powdercoated once you receive it\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump PN MB2060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266240666,"sku":"MB-MB1011-S","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1011-S-HJQL.jpg?v=1760968431"},{"product_id":"jeep-jl-gladiator-front-bumper-w-bull-bar-crusher-2018-present-wrangler-jl-gladiator-motobilt","title":"Jeep JL\/Gladiator Front Bumper W\/Bull Bar Crusher 2018-Present Wrangler JL\/Gladiator Motobilt","description":"\u003cp\u003eThe Motobilt Jeep Wrangler JL\/Jeep Gladiator Crusher recessed winch bumper with bull bar will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon. The high clearance design includes a built in skid plate also. The bumper is made from 3\/16 inch thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3\/4 inch thick laser cut d ring mounts that pass through the bumper and are welded both inside and out.\u003c\/p\u003e\n\u003cp\u003eThese d ring mounts accept many common sizes of recovery shackles (not included). This setup provides for superior strength.\u003c\/p\u003e\n\u003cp\u003eThe bull bar is made out of 1 3\/4 inch DOM steel tubing. This is the same material used for roll cages and tube chassis so it is built for strength. The shorter design of the bull bar provides good looks and protects your winch.\u003c\/p\u003e\n\u003cp\u003eThe bumper measures in at just 46 inch at its widest point. and provides ample clearnace for 40 inch tires. The bumper will ship bare metal and will need to be painted or powder coated once you receive it. It comes with all the necessarey mounting hardware.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266306202,"sku":"MB-MB1078-B","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1078-B_2-HJQL.png?v=1760968469"},{"product_id":"jeep-jl-gladiator-front-bumper-w-stinger-18-wrangler-jl-gladiator-the-hammer-series-motobilt","title":"Jeep JL\/Gladiator Front Bumper W\/Stinger 18+ Wrangler JL\/Gladiator The Hammer Series Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JL Hammer Stinger front bumper with fog light holes. It features DOM steel tube stinger and built in provisions for factory style fog lights. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA.\u003c\/p\u003e\n\u003cp\u003eOur JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer Stinger bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle.\u003c\/p\u003e\n\u003cp\u003eThe main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JL Stinger Hammer 48.5 inch front bumper.\u003c\/li\u003e\n\u003cli\u003eStinger made from 1 3\/4 inch steel DOM tube and laser cut gussets from 3\/16 inch steel.\u003c\/li\u003e\n\u003cli\u003eFits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited\u003c\/li\u003e\n\u003cli\u003eFits 2020 and newer Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use.\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JL\u003c\/li\u003e\n\u003cli\u003eLED fog light NOT included, but sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266338970,"sku":"MB-MB1090F-S","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1090F-S-HJQL.jpg?v=1760968518"},{"product_id":"crusher-series-hd-front-bumper-w-tube-bull-bar-for-jeep-jk-jku-motobilt","title":"Crusher Series HD Front Bumper w\/Tube Bull Bar for Jeep JK\/JKU Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JK Crusher HD front bumper with fog light holes and round tubing bull bar. It features built in provisions for Baja Designs Squadron-R Light Pods.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep JK Front Crusher HD Bumper is a 46.25 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK Crusher HD Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK.\u003c\/p\u003e\n\u003cp\u003eThe bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon.\u003c\/p\u003e\n\u003cp\u003eThe front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe bull bar is made out of 1 3\/4 inch DOM steel tubing. This is the same material used for roll cages and tube chassis so it is built for strength. The shorter design of the bull bar provides good looks and protects your winch.\u003c\/p\u003e\n\u003cp\u003eThe Crusher HD bumper has provisions to mount Baja Designs Squadron-R Light Pods. The Crusher HD bumper can be run with or without the optional skid plate. The ends of the Crusher HD bumper taper up for tire clearance.\u003c\/p\u003e\n\u003cp\u003eEach cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007 to 2018 Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eRecessed Winch plate included\u003c\/li\u003e\n\u003cli\u003eFabricated From 3\/16 inch Thick High Strength Steel Plate\u003c\/li\u003e\n\u003cli\u003eThe bull bar is made out of 1.75 inch x .120 inch wall DOM tube and braced with laser cut gussets\u003c\/li\u003e\n\u003cli\u003eBolt-On Design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch Thick Steel D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003ePass Through D-Ring Mounts Welded to Bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003eWeight: 65lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips raw steel\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\/JKU\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately. See Related Parts.\u003c\/li\u003e\n\u003cli\u003eBaja Designs Squadron-R Light Pods NOT included.\u003c\/li\u003e\n\u003cli\u003eYour factory frame holes may need to be opened up to 5\/8 inch due to tolerance differences in the factory frame rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLight Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength (In.) 3.5\u003c\/li\u003e\n\u003cli\u003eHeight (In.) 3.5\u003c\/li\u003e\n\u003cli\u003eDepth (In.) 2.77\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266371738,"sku":"MB-MB1209-B","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1209-B-HJQL.jpg?v=1760968757"},{"product_id":"crusher-series-hd-front-bumper-w-tube-bull-bar-for-jeep-jl-jt-motobilt","title":"Crusher Series HD Front Bumper w\/Tube Bull Bar for Jeep JL\/JT Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JL Crusher HD front bumper with fog light holes and round tubing bull bar. It features built in provisions for Baja Designs Squadron-R Light Pods.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep JL Front Crusher HD Bumper is a 46.25 inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Crusher HD Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL and Jeep JT Gladiator.\u003c\/p\u003e\n\u003cp\u003eThe bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon.\u003c\/p\u003e\n\u003cp\u003eThe front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe bull bar is made out of 1 3\/4 inch DOM steel tubing. This is the same material used for roll cages and tube chassis so it is built for strength. The shorter design of the bull bar provides good looks and protects your winch.\u003c\/p\u003e\n\u003cp\u003eThe Crusher HD bumper has provisions to mount Baja Designs Squadron-R Light Pods. The Crusher HD bumper can be run with or without the optional skid plate. The ends of the Crusher HD bumper taper up for tire clearance.\u003c\/p\u003e\n\u003cp\u003eEach cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2018 and Newer Jeep JL 2 door and 4 door JL Unlimited and Jeep JT Gladiator 2020 and up\u003c\/li\u003e\n\u003cli\u003eRecessed Winch plate included.\u003c\/li\u003e\n\u003cli\u003eFabricated From 3\/16 inch Thick High Strength Steel Plate\u003c\/li\u003e\n\u003cli\u003eThe bull bar is made out of 1.75 inch x .120 inch wall DOM tube and braced with laser cut gussets\u003c\/li\u003e\n\u003cli\u003eBolt-On Design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch Thick Steel D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003ePass Through D-Ring Mounts Welded to Bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003eWeight: 65lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips raw steel\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JL\/JT\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately. See Related Parts.\u003c\/li\u003e\n\u003cli\u003eBaja Designs Squadron-R Light Pods NOT included.\u003c\/li\u003e\n\u003cli\u003eYour factory frame holes may need to be opened up to 5\/8 inch due to tolerance differences in the factory frame rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLight Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength (In.) 3.5\u003c\/li\u003e\n\u003cli\u003eHeight (In.) 3.5\u003c\/li\u003e\n\u003cli\u003eDepth (In.) 2.77\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266404506,"sku":"MB-MB1200-B","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1200-B-HJQL.jpg?v=1760968758"},{"product_id":"gladius-frame-chop-bumper-for-jeep-jk-jl-jt-motobilt","title":"Gladius Frame Chop Bumper for Jeep JK\/JL\/JT Motobilt","description":"\u003cp\u003eTransform your Jeep into an unstoppable force on any terrain with the Gladius Frame Chop Front Bumper. Expertly crafted for the Jeep Wrangler JK, JKU, JL, JLU, and Gladiator JT models, this bumper is designed to conquer the toughest off-road obstacles with ease.\u003c\/p\u003e\n\u003cp\u003eIts innovative frame chop design significantly enhances your vehicle's approach angles, allowing for a more aggressive off-roading experience. Our winch bumper is designed to fit a standard mounting pattern of 10 inch x 4.5 inch and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrame Modification Required: Installation necessitates cutting of the frame, ensuring a perfect fit and superior performance.\u003c\/li\u003e\n\u003cli\u003eFoglight Provisions: Comes ready to integrate Baja Designs Squadrons, providing exceptional lighting for night-time adventures or low-visibility conditions. NOT for use with Factory fog lights.\u003c\/li\u003e\n\u003cli\u003eEnhanced Clearance: Specifically designed to improve approach angles to off-road obstacles, making your Jeep more capable and versatile.\u003c\/li\u003e\n\u003cli\u003eRobust Construction: Manufactured from high-strength A36 steel, complemented by an aluminum accent panel for a sleek, rugged look.\u003c\/li\u003e\n\u003cli\u003eCompatibility Note: This bumper is not compatible with the Rubicon swaybar disconnect system. (See swaybar compatibility options below)\u003c\/li\u003e\n\u003cli\u003eWinch: Our winch bumper is designed to fit a standard mounting pattern of 10 inch x 4.5 inch and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK\/JKU 2007-2018\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL\/JLU 2018-Current\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT 2020-Current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProudly Made in the USA: Crafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003eWinch Compatibility: Specially designed for seamless integration with the Warn VR Evo and Zeon series winches, with potential compatibility with other manufacturers.\u003c\/li\u003e\n\u003cli\u003eDimensions: MB1248 measures 7.3 inch in height, 40.5 inch in width, providing a compact yet powerful addition to your Jeep's front end.\u003c\/li\u003e\n\u003cli\u003eWeight MB1248\/MB1248-B: 66.5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eShips raw steel. Must be painted or powder coated to prevent rust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwaybar Compatibility:\u003c\/strong\u003e\u003cbr\u003eJeep JK\/JKU Swaybar Compatibility: You can reuse the factory swaybar, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. ??This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JKF\u003c\/li\u003e\n\u003cli\u003eCE-9900JKFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJeep JL\/JLU\/JT Gladiator Swaybar Compatibility: The factory swaybar can be modified to fit this product, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. ??This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JLF\u003c\/li\u003e\n\u003cli\u003eCE-9900JLFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElevate your off-road experience with the MB1248 Gladius Frame Chop Front Bumper. Its unmatched durability, enhanced functionality, and aggressive styling make it an essential upgrade for any serious off-roader. Whether tackling rocky trails or navigating through mud and sand, this bumper is built to help you push your Jeep to its limits.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266437274,"sku":"MB-MB1248","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1248_1-HJQL.jpg?v=1760968785"},{"product_id":"gladius-frame-chop-bumper-for-jeep-jk-jl-jt-fits-warn-m8274-motobilt","title":"Gladius Frame Chop Bumper for Jeep JK\/JL\/JT - Fits WARN M8274 Motobilt","description":"\u003cp\u003eElevate your off-road experience with the Gladius Frame Chop Front Bumper, meticulously engineered for the Jeep JK, JKU, JL, JLU, and Gladiator JT models. Designed to accommodate the legendary Warn M8274 winch, this bumper is the ultimate upgrade for adventurers seeking unparalleled approach clearance and rugged aesthetics. This winch is made exclusively for the WARN M8274\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrame Modification Required: Cutting of the frame is necessary to install this bumper, ensuring a seamless fit and enhanced off-road capability.\u003c\/li\u003e\n\u003cli\u003eFoglight Provisions: Equipped to house Baja Designs Squadrons, this bumper not only protects your ride but also lights the way forward in the most challenging conditions. NOT for use with Factory fog lights.\u003c\/li\u003e\n\u003cli\u003eImproved Clearance: The frame chop design significantly increases approach angles, allowing you to tackle off-road obstacles with confidence.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Crafted from A36 steel, known for its strength and reliability, with an aluminum accent panel for a touch of style.\u003c\/li\u003e\n\u003cli\u003eCompatibility Note: This bumper is not compatible with the Rubicon swaybar disconnect feature. (see swaybar compatibility note below)\u003c\/li\u003e\n\u003cli\u003eWinch: This winch is made exclusively for the WARN M8274\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL \/ JLU 2018-Current\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT 2020-Current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProudly Made in the USA: Domestic manufacturing ensures top-quality craftsmanship and supports local economies.\u003c\/li\u003e\n\u003cli\u003eSpecially Designed for the Warn M8274: Tailored to seamlessly integrate with one of the most iconic winches for unmatched performance.\u003c\/li\u003e\n\u003cli\u003eDimensions and Weight:\u003c\/li\u003e\n\u003cli\u003eMB1238: 8 inch Height x 40.5 inch Width x 16.8 inch Depth, Weight: 69 lbs\u003c\/li\u003e\n\u003cli\u003eMB1238-B: 14.8 inch Height x 40.5 inch Width x 19.5 inch Depth, Weight: 78.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eShips raw steel. Must be painted or powder coated to prevent rust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwaybar Compatibility:\u003c\/strong\u003e\u003cbr\u003eJeep JK\/JKU Swaybar Compatibility: You can reuse the factory swaybar, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JKF\u003c\/li\u003e\n\u003cli\u003eCE-9900JKFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eJeep JL\/JLU\/JT Gladiator Swaybar Compatibility:\u003c\/strong\u003e The factory swaybar can be modified to fit this product, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JLF\u003c\/li\u003e\n\u003cli\u003eCE-9900JLFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTransform your Jeep into an off-road powerhouse with the Gladius Frame Chop Front Bumper. Its robust construction, thoughtful design for lighting and winch integration, and improved approach clearance make it an essential upgrade for the serious off-roader.\u003c\/p\u003e\n\u003cp\u003eOrder now and take the first step towards unlocking the full potential of your Jeep on the trails!\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266470042,"sku":"MB-MB1238","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1238_3-HJQL.jpg?v=1760968783"},{"product_id":"jeep-jl-gladiator-front-bumper-w-stinger-skid-plate-18-wrangler-jl-gladiator-the-hammer-series-motobilt","title":"Jeep JL\/Gladiator Front Bumper W\/Stinger\/Skid Plate 18+ Wrangler JL\/Gladiator The Hammer Series Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JL Hammer Stinger front bumper with skid plate and fog light holes. It features DOM steel tube stinger, built in provisions for factory style fog lights, and the skid plate is laser cut from 3\/16 inch P and O steel and formed on a press brake. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA.\u003c\/p\u003e\n\u003cp\u003eOur JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. The ends of the Hammer bumper taper up for tire clearance.\u003c\/p\u003e\n\u003cp\u003eEach cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JL Stinger Hammer 48.5 inch front bumper wth skid plate.\u003c\/li\u003e\n\u003cli\u003eStinger made from 1 3\/4 inch steel DOM tube and laser cut gussets from 3\/16 inch steel.\u003c\/li\u003e\n\u003cli\u003eFits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited\u003c\/li\u003e\n\u003cli\u003eFist 2020 and newer Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use.\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JL\u003c\/li\u003e\n\u003cli\u003eLED fog light Not included, but sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266535578,"sku":"MB-MB1090F-S-1094","price":1029.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1090F-S-1094-HJQL.png?v=1760968516"},{"product_id":"hammer-series-front-bumper-w-grill-hoop-and-stinger-for-jeep-jk-jku-motobilt","title":"Hammer Series Front Bumper w\/Grill Hoop and Stinger for Jeep JK\/JKU Motobilt","description":"\u003cp\u003eThe Motobilt Jeep JK Front The Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited.\u003c\/p\u003e\n\u003cp\u003eThe front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate.\u003c\/p\u003e\n\u003cp\u003eTo install the skid plate, you have to trim approx 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle.\u003c\/p\u003e\n\u003cp\u003eThe main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHammer Series Front Bumper w\/Grill Hoop and Stinger for Jeep JK\/JKU\u003c\/li\u003e\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper with stinger and grill hoop\u003c\/li\u003e\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003cli\u003eWeight: 90lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003eShips bare steel\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately\u003c\/li\u003e\n\u003cli\u003eLED fog lights sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266863258,"sku":"MB-MB1025-L","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1025-L-HJQL.jpg?v=1760968742"},{"product_id":"gladius-frame-chop-bumper-with-bull-bar-for-jeep-jk-jl-jt-motobilt","title":"Gladius Frame Chop Bumper with Bull Bar for Jeep JK\/JL\/JT Motobilt","description":"\u003cp\u003eTransform your Jeep into an unstoppable force on any terrain with the Gladius Frame Chop Front Bumper with Bull Bar. Expertly crafted for the Jeep Wrangler JK, JKU, JL, JLU, and Gladiator JT models, this bumper is designed to conquer the toughest off-road obstacles with ease.\u003c\/p\u003e\n\u003cp\u003eIts innovative frame chop design significantly enhances your vehicle's approach angles, allowing for a more aggressive off-roading experience. Our winch bumper is designed to fit a standard mounting pattern of 10 inch x 4.5 inch and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrame Modification Required: Installation necessitates cutting of the frame, ensuring a perfect fit and superior performance.\u003c\/li\u003e\n\u003cli\u003eFoglight Provisions: Comes ready to integrate Baja Designs Squadrons, providing exceptional lighting for night-time adventures or low-visibility conditions. NOT for use with Factory fog lights.\u003c\/li\u003e\n\u003cli\u003eEnhanced Clearance: Specifically designed to improve approach angles to off-road obstacles, making your Jeep more capable and versatile.\u003c\/li\u003e\n\u003cli\u003eRobust Construction: Manufactured from high-strength A36 steel, complemented by an aluminum accent panel for a sleek, rugged look.\u003c\/li\u003e\n\u003cli\u003eCompatibility Note: This bumper is not compatible with the Rubicon swaybar disconnect system. (see swaybar compatibility note below)\u003c\/li\u003e\n\u003cli\u003eWinch: Our winch bumper is designed to fit a standard mounting pattern of 10 inch x 4.5 inch and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK\/JKU 2007-2018\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL\/JLU 2018-Current\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT 2020-Current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProudly Made in the USA: Crafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003eWinch Compatibility: Specially designed for seamless integration with the Warn VR Evo and Zeon series winches, with potential compatibility with other manufacturers.\u003c\/li\u003e\n\u003cli\u003eDimensions: MB1248-B measures 7.3 inch in height, 40.5 inch in width, providing a compact yet powerful addition to your Jeep's front end.\u003c\/li\u003e\n\u003cli\u003eWeight MB1248\/MB1248-B: 75.9 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eShips raw steel. Must be painted or powder coated to prevent rust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwaybar Compatibility:\u003c\/strong\u003e\u003cbr\u003eJeep JK\/JKU Swaybar Compatibility: You can reuse the factory swaybar, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. ??This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JKF\u003c\/li\u003e\n\u003cli\u003eCE-9900JKFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJeep JL\/JLU\/JT Gladiator Swaybar Compatibility: The factory swaybar can be modified to fit this product, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JLF\u003c\/li\u003e\n\u003cli\u003eCE-9900JLFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElevate your off-road experience with the MB1248-B Gladius Frame Chop Front Bumper. Its unmatched durability, enhanced functionality, and aggressive styling make it an essential upgrade for any serious off-roader. Whether tackling rocky trails or navigating through mud and sand, this bumper is built to help you push your Jeep to its limits.\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675266928794,"sku":"MB-MB1248-B","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1248-B_1-HJQL.jpg?v=1760968778"},{"product_id":"gladius-frame-chop-bumper-with-bull-bar-for-jeep-jk-jl-jt-fits-warn-m8274-motobilt","title":"Gladius Frame Chop Bumper with Bull Bar for Jeep JK\/JL\/JT - Fits Warn M8274 Motobilt","description":"\u003cp\u003eElevate your off-road experience with the Gladius Frame Chop Front Bumper with Bull Bar, meticulously engineered for the Jeep JK, JKU, JL, JLU, and Gladiator JT models. Designed to accommodate the legendary Warn M8274 winch, this bumper is the ultimate upgrade for adventurers seeking unparalleled approach clearance and rugged aesthetics. This winch is made exclusively for the WARN M8274\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrame Modification Required: Cutting of the frame is necessary to install this bumper, ensuring a seamless fit and enhanced off-road capability.\u003c\/li\u003e\n\u003cli\u003eFoglight Provisions: Equipped to house Baja Designs Squadrons, this bumper not only protects your ride but also lights the way forward in the most challenging conditions. NOT for use with Factory fog lights.\u003c\/li\u003e\n\u003cli\u003eImproved Clearance: The frame chop design significantly increases approach angles, allowing you to tackle off-road obstacles with confidence.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Crafted from A36 steel, known for its strength and reliability, with an aluminum accent panel for a touch of style.\u003c\/li\u003e\n\u003cli\u003eCompatibility Note: This bumper is not compatible with the Rubicon swaybar disconnect feature. (see swaybar compatibility note below)\u003c\/li\u003e\n\u003cli\u003eWinch: This winch is made exclusively for the WARN M8274\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\n\u003cli\u003eJeep Wrangler JL \/ JLU 2018-Current\u003c\/li\u003e\n\u003cli\u003eJeep Gladiator JT 2020-Current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProudly Made in the USA: Domestic manufacturing ensures top-quality craftsmanship and supports local economies.\u003c\/li\u003e\n\u003cli\u003eSpecially Designed for the Warn M8274: Tailored to seamlessly integrate with one of the most iconic winches for unmatched performance.\u003c\/li\u003e\n\u003cli\u003eDimensions and Weight:\u003c\/li\u003e\n\u003cli\u003eMB1238: 8 inch Height x 40.5 inch Width x 16.8 inch Depth, Weight: 69 lbs\u003c\/li\u003e\n\u003cli\u003eMB1238-B: 14.8 inch Height x 40.5 inch Width x 19.5 inch Depth, Weight: 78.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eShips raw steel. Must be painted or powder coated to prevent rust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwaybar Compatibility:\u003c\/strong\u003e\u003cbr\u003eJeep JK\/JKU Swaybar Compatibility: You can reuse the factory swaybar, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JKF\u003c\/li\u003e\n\u003cli\u003eCE-9900JKFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eJeep JL\/JLU\/JT Gladiator Swaybar Compatibility:\u003c\/strong\u003e The factory swaybar can be modified to fit this product, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. This product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9900JLF\u003c\/li\u003e\n\u003cli\u003eCE-9900JLFA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTransform your Jeep into an off-road powerhouse with the Gladius Frame Chop Front Bumper. Its robust construction, thoughtful design for lighting and winch integration, and improved approach clearance make it an essential upgrade for the serious off-roader.\u003c\/p\u003e\n\u003cp\u003eOrder now and take the first step towards unlocking the full potential of your Jeep on the trails!\u003c\/p\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267256474,"sku":"MB-MB1238-B","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1238-B_2-HJQL.jpg?v=1760968779"},{"product_id":"jeep-jk-front-bumper-w-stinger-and-grill-hoop-07-18-wrangler-jk-the-hammer-series-bare-steel-motobilt","title":"Jeep JK Front Bumper W\/Stinger and Grill Hoop 07-18 Wrangler JK The Hammer Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Jeep JK Front The Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper with stinger and grill hoop\u003c\/li\u003e\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately\u003c\/li\u003e\n\u003cli\u003eLED fog lights sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267322010,"sku":"MB-MB1025F-L","price":1079.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1025F-L-HJQL.jpg?v=1760968426"},{"product_id":"jeep-jk-front-bumper-w-grill-hoop-and-stinger-07-18-wrangler-jk-crusher-series-bare-steel-motobilt","title":"Jeep JK Front Bumper W\/Grill Hoop And Stinger 07-18 Wrangler JK Crusher Series Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Jeep Wrangler JK Crusher recessed winch bumper with grill hoop and stinger will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The grill hoop, stinger, and connecting tubes are made out of 1.75 inch x .120 inch wall DOM tube. The high clearance design includes a built in skid plate also. The bumper is made from 3\/16 inch thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3\/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength. \u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep Wrangler JK front Crusher recessed winch bumper with grill hoop and stinger\u003c\/li\u003e\n\u003cli\u003eMeasures in at just 46.5 inch at its widest point\u003c\/li\u003e\n\u003cli\u003e3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out\u003c\/li\u003e\n\u003cli\u003eConnecting tubes are made out of 1.75 inch x .120 inch wall DOM tube\u003c\/li\u003e\n\u003cli\u003eIncludes all the necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eSold as kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003eWill Not work with Teraflex S\/T Dual rate front sway bar\u003c\/li\u003e\n\u003cli\u003eThe outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts\u003c\/li\u003e\n\u003cli\u003eShips bare metal and will need to be painted or powdercoated once you receive it\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump. PN MB2060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267354778,"sku":"MB-MB1011-L","price":1079.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1011-L-HJQL.jpg?v=1760968431"},{"product_id":"crusher-hd-front-bumper-for-jeep-jl-with-bull-bar-and-skidplate-motobilt","title":"Crusher HD Front Bumper for Jeep JL with Bull bar and Skidplate Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JL\/JT Crusher HD front bumper with fog light holes. It features built in provisions for Baja Designs Squadron-R Light Pods. The Motobilt Jeep JL\/JT Front Crusher HD Bumper is a 46.25 inch wide, sleek, tight-fitting design proudly made in the USA.\u003c\/p\u003e\n\u003cp\u003eOur JL\/JT Crusher HD Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL and JT Gladiator. The bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon.\u003c\/p\u003e\n\u003cp\u003eThe front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Crusher HD bumper has provisions to mount Baja Designs Squadron-R Light Pods. The Crusher HD bumper can be run with or without the skid plate. The ends of the Crusher HD bumper taper up for tire clearance.\u003c\/p\u003e\n\u003cp\u003eEach cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2018 and Newer Jeep JL 2 door and 4 door JL Unlimited and Jeep JT Gladiator 2020 and up\u003c\/li\u003e\n\u003cli\u003eRecessed Winch\u003c\/li\u003e\n\u003cli\u003eFabricated From 3\/16 inch Thick High Strength Steel Plate\u003c\/li\u003e\n\u003cli\u003eBolt-On Design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch Thick Steel D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003ePass Through D-Ring Mounts Welded to Bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003eSkid plate and bull bar included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003eWeight: 65lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips raw steel\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JL\/JT\u003c\/li\u003e\n\u003cli\u003eBaja Designs Squadron-R Light Pods NOT included, but sold separately. See Related Parts\u003c\/li\u003e\n\u003cli\u003eYour factory frame holes may need to be opened up to 5\/8 inch due to tolerance differences in the factory frame rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMB1200 Bumper, winch plate, fog light mounts, and all necessary hardware\u003c\/li\u003e\n\u003cli\u003eMB1201 Skid plate with all necessary brackets and hardware\u003c\/li\u003e\n\u003cli\u003eMB1203 Bull bar with drill plate template and all necessary hardware.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267387546,"sku":"MB-MB1200-MB1201-MB1203","price":1259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1200-MB1201-MB1203-HJQL.jpg?v=1760968724"},{"product_id":"crusher-hd-front-bumper-for-jeep-jk-jku-with-bullbar-and-skidplate-motobilt","title":"Crusher HD Front Bumper for Jeep JK\/JKU with BullBar and Skidplate Motobilt","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eThe Motobilt Jeep JL\/JT Front Crusher HD Bumper is a 46.25 inch wide, sleek, tight-fitting design proudly made in the USA. Our JL\/JT Crusher HD Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL and JT Gladiator.\u003c\/p\u003e\n\u003cp\u003eThe bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon.\u003c\/p\u003e\n\u003cp\u003eThe front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Crusher HD bumper has provisions to mount Baja Designs Squadron-R Light Pods. The Crusher HD bumper can be run with or without the skid plate. The ends of the Crusher HD bumper taper up for tire clearance.\u003c\/p\u003e\n\u003cp\u003eEach cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2007 and Newer Jeep JK2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eRecessed Winch\u003c\/li\u003e\n\u003cli\u003eFabricated From 3\/16 inch Thick High Strength Steel Plate\u003c\/li\u003e\n\u003cli\u003eBolt-On Design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch Thick Steel D-Ring Mounts\u003c\/li\u003e\n\u003cli\u003ePass Through D-Ring Mounts Welded to Bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as Package\u003c\/li\u003e\n\u003cli\u003eWeight: 65lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips raw steel\u003c\/li\u003e\n\u003cli\u003eBaja Designs Squadron-R Light Pods NOT included\u003c\/li\u003e\n\u003cli\u003eYour factory frame holes may need to be opened up to 5\/8 inch due to tolerance differences in the factory frame rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMB1209 Bumper, winch plate, fog light mounts, and all necessary hardware\u003c\/li\u003e\n\u003cli\u003eMB1210 Skid plate with all necessary brackets and hardware\u003c\/li\u003e\n\u003cli\u003eMB1203 Bull bar with drill plate template and all necessary hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLight Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength (In.) 3.5\u003c\/li\u003e\n\u003cli\u003eHeight (In.) 3.5\u003c\/li\u003e\n\u003cli\u003eDepth (In.) 2.77\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267420314,"sku":"MB-MB1209-MB1210-MB1203","price":1259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1209-MB1210-MB1203-HJQL.jpg?v=1760968760"},{"product_id":"jeep-jk-micro-rear-bumper-07-18-wrangler-jk-bare-steel-motobilt","title":"Jeep JK Micro Rear Bumper 07-18 Wrangler JK Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Jeep JK Micro Rear Bumper is CNC cut and formed out of 3\/16 inch plate. Four holes in bumper are to clear the hit bolts because it fits tightly to the frame. Bumper does clear factory style receiver hitch. You will have to slightly trim off the frame on the back. Only minimal trimming required in a way where if you want to change bumpers in the future, it will not hinder other bumper fitment. Ships bare metal so you can paint or powdercoat the color of your choice.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK micro rear bumper\u003c\/li\u003e\n\u003cli\u003eCNC cut and formed out of 3\/16 inch plate\u003c\/li\u003e\n\u003cli\u003eD-ring mounts available\u003c\/li\u003e\n\u003cli\u003eHardware not included\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips bare metal, paint or powdercoat needed before use\u003c\/li\u003e\n\u003cli\u003eMotobilt Jeep JK Micro Rear Bumper Cover is designed to be used with Motobilt Jeep JK Rear D-Ring mounts\u003c\/li\u003e\n\u003cli\u003ePurchase PN MB2072 if you require D Ring mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBumper laws vary from state to state. Please ensure rear bumper requirements in your area. Offroad use only. Not designed to be run with a spare tire.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267616922,"sku":"MB-MB1040","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1040-HJQL.jpg?v=1760968391"},{"product_id":"gladiator-rear-bumper-corner-frame-mounts-motobilt","title":"Gladiator Rear Bumper Corner Frame Mounts Motobilt","description":"\u003cp\u003eThe Motobilt MB1111 Heavy Duty Bumper to Frame Rail Brackets are an upgrade over the factory brackets. With 64 percent thicker steel and larger, more continuous welds versus their factory counterparts, you will never have to worry about damaging your Frame Rail Brackets or your sheet metal.\u003c\/p\u003e\n\u003cp\u003eThe direct Mopar replacements are 68356518AA and 68356519AA which retail for 67 dollar to 70 dollar each (140 dollar for the pair). Our Motobilt MB1111 Heavy Duty Bumper to Frame Rail Brackets retail for 199 dollar for pair. 60 dollar more than the factory replacement parts. What do you get for that extra 60 dollar? 64 percent thicker material.\u003c\/p\u003e\n\u003cp\u003eThe factory Mopar Bumper to Frame Rail Brackets are constructed from 11 Gauge stamped steel (0.12 inch thick).Motobilt brackets are constructed from 0.1875 inch (0.1875 inch) thick laser cut and CNC precision formed steel. Thicker steel stronger part less damage! More welds.\u003c\/p\u003e\n\u003cp\u003eThe factory brackets are held together with a twelve 0.0937 inch stitch welds for a total of 21.4 inch linear inches of weld.Our Heavy Duty Frame Rail Brackets are fully MIG welded all around with 0.1875 inch fillet welds for a total of 37.4 inch linear inches of weld. Our welds are twice as thick with 57 percent more welds. Larger welds and more welds more strength!\u003c\/p\u003e\n\u003cp\u003eEver have to wait to get a factory part in from a dealership? It's hit or miss on your wait time. You don't have to go searching online or have to order and wait to get them in at your local Jeep dealership. We have them ready to ship and can accompany your order for your MB1110 Gladiator Crusher Rear Bumper. No waiting and no searching happy customer!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2020-2020 Jeep Gladiator\u003c\/li\u003e\n\u003cli\u003eSold As Pair\u003c\/li\u003e\n\u003cli\u003eHardware Included Yes\u003c\/li\u003e\n\u003cli\u003eFinish Bare\u003c\/li\u003e\n\u003cli\u003eLocation Rear\u003c\/li\u003e\n\u003cli\u003eMaterial Steel\u003c\/li\u003e\n\u003cli\u003eThickness 0.12 inch\u003c\/li\u003e\n\u003cli\u003eCut CNC Laser Cut\u003c\/li\u003e\n\u003cli\u003eFormed Stamped\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267813530,"sku":"MB-MB1111","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1111-HJQL.jpg?v=1760968586"},{"product_id":"jeep-jk-micro-rear-bumper-w-light-bar-cut-out-07-18-wrangler-jk-bare-steel-motobilt","title":"Jeep JK Micro Rear Bumper W\/Light Bar Cut Out 07-18 Wrangler JK Bare Steel Motobilt","description":"\u003cp\u003eThe Motobilt Jeep JK Micro rear bumper is CNC cut and formed out of 3\/16 inch plate. Four holes in bumper are to clear the hit bolts because it fits tightly to the frame. Micro bumper has a cut out for a 20 inch single row light bar designed for a light bar measuring 21.5 inch wide at the mounting surface.\u003c\/p\u003e\n\u003cp\u003eBumper does clear factory style receiver hitch. You will have to slightly trim off the frame on the back. Only minimal trimming required in a way where if you want to change bumpers in the future, it will not hinder other bumper fitment. Ships bare metal so you can paint or powdercoat the color of your choice.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK micro rear bumper with LED light bar mount\u003c\/li\u003e\n\u003cli\u003eCNC cut and formed out of 3\/16 inch plate\u003c\/li\u003e\n\u003cli\u003eCut out for a 20 inch single row light bar\u003c\/li\u003e\n\u003cli\u003eRear d-ring mounts available\u003c\/li\u003e\n\u003cli\u003e20 inch LED light bar available\u003c\/li\u003e\n\u003cli\u003eHardware not included\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips bare metal, paint or powdercoat needed before use\u003c\/li\u003e\n\u003cli\u003eMotobilt Jeep JK Micro Rear Bumper Cover is designed to be used with Motobilt Jeep JK Rear D-Ring mounts\u003c\/li\u003e\n\u003cli\u003ePurchase PN MB2072 if you require D Ring mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBumper laws vary from state to state. Please ensure rear bumper requirements in your area. Offroad use only. Not designed to be run with a spare tire.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267846298,"sku":"MB-MB1039","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1039_2-HJQL.png?v=1760968394"},{"product_id":"micro-series-rear-bumper-for-jeep-jl-jlu-motobilt","title":"Micro Series Rear Bumper for Jeep JL\/JLU Motobilt","description":"\u003cp\u003eFollowing the great success of our Crusher Rear bumper we have created the Micro Series bumper. The stubby bumper approach to design gives you more clearance in the rear of your vehicle to climb off those big rocks.\u003c\/p\u003e\n\u003cp\u003eCombined with our MB2184 lower corner armor the rear of your vehicle is protected from all of your wheeling adventures. The bumper ships bare steel and requires painting before installation. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicro Series Rear Bumper for Jeep JL\/JLU\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Backup Sensors\u003c\/li\u003e\n\u003cli\u003eDimensions H\/W\/D = 5.5 inch x 50.83 inch x 6.875 inch\u003c\/li\u003e\n\u003cli\u003eWeight = 33 LBS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267879066,"sku":"MB-MB2183","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB2183-HJQL.jpg?v=1760968772"},{"product_id":"jeep-jl-rear-bumper-crusher-no-spare-2018-pres-wrangler-jl-motobilt","title":"Jeep JL Rear Bumper Crusher No Spare 2018-Pres Wrangler JL Motobilt","description":"\u003cp\u003eThe new Motobilt Crusher rear bumper for the JL was designed to work without a spare tire. This bumper was created to provide the most clearance possible while remaining completely bolt on. The Motobilt Jeep JL Crusher rear bumper has tons of clearance but we also added several other details.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4 inch steel D rings that pass through the bumper and are welded on both sides\u003c\/li\u003e\n\u003cli\u003eWorks with factory receiver hitch\u003c\/li\u003e\n\u003cli\u003eComplete body protection around the JL's corners\u003c\/li\u003e\n\u003cli\u003eMultiple Hi Lift jack points.\u003c\/li\u003e\n\u003cli\u003eHD 3\/16 inch laser cut steel plate design\u003c\/li\u003e\n\u003cli\u003eIncludes hardware\u003c\/li\u003e\n\u003cli\u003eShips raw steel and will need to be painted or powder coated\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675267944602,"sku":"MB-MB1079","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1079-HJQL.jpg?v=1760968469"},{"product_id":"jeep-jl-rear-bumper-with-light-cut-outs-crusher-no-spare-2018-present-wrangler-jl-motobilt","title":"Jeep JL Rear Bumper With Light Cut Outs Crusher No Spare 2018-Present Wrangler JL Motobilt","description":"\u003cp\u003eThe new Motobilt Crusher rear bumper with light cut outs for the JL was designed to work without a spare tire. This bumper was created to provide the most clearance possible while remaining completely bolt on.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt Jeep JL Crusher rear bumper has tons of clearance but we also added several other details.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4 inch steel D rings that pass through the bumper and are welded on both sides\u003c\/li\u003e\n\u003cli\u003eCut outs for 3 inch x 3 inch cube lights with internal mounts for standard stud type mounting.\u003c\/li\u003e\n\u003cli\u003eWorks with factory receiver hitch\u003c\/li\u003e\n\u003cli\u003eComplete body protection around the JL's corners\u003c\/li\u003e\n\u003cli\u003eHD 3\/16 inch laser cut steel plate design\u003c\/li\u003e\n\u003cli\u003eIncludes hardware\u003c\/li\u003e\n\u003cli\u003eBolt on design not cutting or drilling required.\u003c\/li\u003e\n\u003cli\u003eShips raw steel and will need to be painted or powder coated\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675268141210,"sku":"MB-MB1091","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1091_4-HJQL.png?v=1760968539"}],"url":"https:\/\/www.rubitrux.com\/collections\/motobilt-jeep-bumpers-armor-suspension-diy-builder-parts.oembed?page=13","provider":"RubiTrux","version":"1.0","type":"link"}