{"title":"Fairleads","description":"\u003cp\u003e\u003cspan\u003eWinches are a key part of vehicle recovery, but without the right fairlead, the recovery may not be safe! RubiTrux carries the best fairleads in the industry to make sure that your winch rope will be protected at all times! Keep in mind that a steel rope uses a roller style fairlead, while a synthetic rope can use a hawse style fairlead. With fairleads like the Warn Epic series, the Maximus-3 Max Glide, or the Factor 55 Aluminum Hawse, RubiTrux is sure to offer a solution that fits your style and provides safe recovery performance for your Wrangler or Gladiator.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you aren’t sure where to start, give our Jeep experts a call to learn what Fairleads go best with your setup. Lowest Price Guaranteed. Free Shipping With Most Items.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"rugged-ridge-license-plate-bracket-for-hawse-fairleads-11238-07","title":"Rugged Ridge 11238.07 License Plate Bracket for Hawse Fairleads","description":"\u003cp\u003eIf your state requires a front license plate, we have a solution for you. Instead of drilling holes in your bumper or risking not running a front plate, this easy to install license plate holder attaches to your winch fairlead. Simply bolt your license plate to the bracket and snap the holder in place. Your license plate is now securely mounted yet easily removable for winching by a 3\/4 inch clip on the bracket. Will not work with all hawse fairleads.\u003c\/p\u003e","brand":"Rugged Ridge","offers":[{"title":"Default Title","offer_id":45629563273370,"sku":"RR-11238.07","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/rugged-ridge-license-front-plate-bracket-hawse-fairlead-11238.jpg?v=1742976931"},{"product_id":"factor-55-aluminum-hawse-fairlead","title":"Factor 55 Aluminum Hawse Fairlead; 1\" \u0026 1.5\" Thickness","description":"\u003cp\u003eFactor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick.\u003c\/p\u003e\n\n\u003cp\u003eThe thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 and 1.5 fairleads are the industry’s first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles.\u003c\/p\u003e\n\n\n\u003cp\u003eThe rope slot height opening is taller to allow the larger ½” tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension “suck down” device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.\u003c\/p\u003e\n\n\n\u003cp\u003eWhat is the best surface finish for Hawse aluminum fairleads?  Without a doubt it is a Type III hard anodized coating.  Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum.  Why?  Because a hard coating can resist the abrasion damage from a dirty\/gritty synthetic winch rope rubbing across it.   Especially during extreme side pulls where rope fiber stresses are extremely high.  A Mil-A-8625 Type III hard anodized finish leaves a .002” thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind (See chart under Corundum\/Sapphire).  Not too far away from diamond hardness actually.  Another valuable material property from hard anodized coatings are the low coefficients of friction.  Low friction = lower rope heat.  Only drawback?  Hard anodizing is not offered in typical bright and fancy anodized colors.  All Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.\u003c\/p\u003e\n\n\n\n\u003cp\u003eOverall Dimension: 12.35″ x 3.25″\u003c\/p\u003e\n\n\u003cp\u003eStandard 10″ Bolt Mount Spacing\u003c\/p\u003e\n\n\n\u003cp\u003eFor synthetic winch rope only.\u003c\/p\u003e\n\n\u003cp\u003e*NOTE- Fairleads DO NOT come with mounting hardware. - The reason for this is depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch.  In most cases, the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length.  In some cases, longer bolts are required and 3\/8″ Grade 5-Grade 8 bolts in 1.25-1.5″ shank length is a good starting point for fitment.  7\/16″ bolts may also be used.  Please contact us with any specific questions.\u003c\/p\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45629568090266,"sku":"F55-0001X","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/factor-55-aluminum-hawse-fairlead-1-0-and-1-5-00016-00019.jpg?v=1742977107"},{"product_id":"warn-polished-aluminum-fairlead-87631-87914","title":"Warn 87914 Aluminum Hawse Fairlead; Polished","description":"\u003cp\u003eOver time fairleads can scratch, fade and get chipped. Replace your worn-out fairlead with a Warn polished aluminum fairlead. These are included in Warn Zeon synthetic rope winches but are not used when a customer decides on a fairlead to better match their Jeep's styling. Compatible with any Jeep, SUV, or truck synthetic winch line.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eNew Warn Polished Aluminum Fairlead\u003c\/li\u003e\n\u003cli\u003eReplace Worn Out Or Corroded Fairlead\u003c\/li\u003e\n\u003cli\u003eNever Installed, from Warn Zeon Synthetic Winches\u003c\/li\u003e\n\u003cli\u003eUses Existing Fairlead Hardware\u003c\/li\u003e\n\u003cli\u003eServes as a Direct Replacement Warn 87631\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eHardware not included, can be installed with fairlead bolts already being utilized or replacement hardware can be sourced from a local hardware store.\u003c\/p\u003e","brand":"Take Off","offers":[{"title":"Default Title","offer_id":45629638115482,"sku":"TOFF-87914","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/warn-polished-aluminum-fairlead.jpg?v=1742980052"},{"product_id":"warn-1-epic-fairlead-polished-or-hard-anodized-black-gunmetal-100655-100650-100660","title":"Warn 1\" Epic Hawse Fairlead Polished or Hard Anodized Black \u0026 Gunmetal","description":"\u003cp\u003eThe Warn Epic fairlead adds a rugged styling that matches quality performance to any winch and bumper setup. Made from forged 6061-T6 billet aluminum, this fairlead provides the performance off-roaders have come to expect from the Warn line of recovery gear and products. One-year warranty against defects in material and workmanship.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eCorrosion, UV, Impact \u0026amp; Weather Resistant\u003c\/li\u003e\n\u003cli\u003eLarge Radius Opening Minimizes Rope Wear\u003c\/li\u003e\n\u003cli\u003eStyled to Match the Warn Epic Line\u003c\/li\u003e\n\u003cli\u003eAvailable in Polished Aluminum or Type III Hard Anodized Black and Gunmetal\u003c\/li\u003e\n\u003cli\u003e1\" Fairlead Thickness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":45629776429210,"sku":"WARN-1006XX","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/warn-fairleads-black-gunmetal-polished.jpg?v=1742982354"},{"product_id":"warn-1-premium-hawse-fairlead-black-or-polished-100333-100334","title":"Warn 1\" Premium Hawse Fairlead; Black \u0026 Polished","description":"\u003cp\u003eThe Warn Premium fairlead adds a classic styling matched with quality performance to any winch and bumper setup. Made from forged 6061-T6 billet aluminum, this fairlead provides the performance off-roaders have come to expect from the Warn line of recovery gear and products. One-year warranty against defects in material and workmanship.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eCorrosion, UV, Impact \u0026amp; Weather Resistant\u003c\/li\u003e\n\u003cli\u003eLarge Radius Opening Minimizes Rope Wear\u003c\/li\u003e\n\u003cli\u003ePolished Aluminum or Type III Hard Anodized Black\u003c\/li\u003e\n\u003cli\u003e1\" Fairlead Thickness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":45629776593050,"sku":"WARN-10033X","price":68.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/warn-parent-pic-fairleads-1-inch-premium-black-and-polished-100333-and-100334.jpg?v=1742982356"},{"product_id":"warn-1-5-epic-hawse-fairlead-polished-or-hard-anodized-black-gunmetal-100730-100725-100735","title":"Warn 1.5\" Epic Hawse Fairlead Hard Anodized Black or Gunmetal","description":"\u003cp\u003eWarn's Epic fairlead will add durability and rugged style to your winch setup. This fairlead is made from forged 6061-T6 billet aluminum and will definitely not disappoint. These are built to last and styled to look great.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged 6061-T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eCorrosion, impact, salt, weather, and UV-resistant for long-lasting good looks\u003c\/li\u003e\n\u003cli\u003eLarge radius opening minimizes rope wear\u003c\/li\u003e\n\u003cli\u003eStyling matches other WARN Epic accessories\u003c\/li\u003e\n\u003cli\u003eAvailable in anodized black or gunmetal finishes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":45629776691354,"sku":"WARN-1007XX","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/warn-fairleads-black-gunmetal-polished_1.jpg?v=1789394329"},{"product_id":"maximus-3-max-glide-aluminum-fairlead-black-red-gunmetal","title":"Maximus-3 Max Glide Aluminum Fairlead; Black, Red \u0026 Gunmetal","description":"\u003cp\u003eAfter rigorous testing with different synthetic winch lines, Maxiums-3 has designed and manufactured one of the highest quality fairleads in the industry. The Maximus-3 Max Glide fairlead utilizes 1\" thick 600-grade aluminum and has been CNC machined and smoothed to remove any sharp edges or burrs that could potentially damage synthetic winch lines.\u003c\/p\u003e\n\n\u003cp\u003eThe red fairlead is color-matched to multiple special edition Rubicons and trim packages found on Wranglers \u0026amp; Gladiators. The red matches the Recon, Hard Rock, Rubicon X, \u0026amp; 10th Anniversary edition Wrangler JKs and the red found with Wrangler JLs \u0026amp; Gladiator JTs equipped with the Steel Bumper Group.\n\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eAvailable in Black, Red \u0026amp; Gunmetal\u003c\/li\u003e\n\u003cli\u003eRed Matches Rubicon Tow Hooks\u003c\/li\u003e\n\u003cli\u003e600-Grade Machined Aluminum, 1\" Thick\u003c\/li\u003e\n\u003cli\u003eCNC Machined \u0026amp; Polished for Smooth Surface\u003c\/li\u003e\n\u003cli\u003eLarge Opening Maximizes Rope Performance\u003c\/li\u003e\n\u003cli\u003eFor Use with Synthetic Rope Only\u003c\/li\u003e\n\u003cli\u003eUniversal Fit with 10\" Mounting Bolt Pattern\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maximus-3","offers":[{"title":"Default Title","offer_id":45629806117018,"sku":"MAX3-MAX-GLIDE","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/maximus_3_max_glide_fairlead_black_red_gray.jpg?v=1742983126"},{"product_id":"hawse-fairlead-1-inch-thick-gun-metal-gray-factor-55","title":"Hawse Fairlead 1 Inch Thick Gun Metal Gray Factor 55","description":"\u003cp\u003eFactor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 fairleads are CNC machined from 1 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick.\u003cbr\u003eThe thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope.\u003c\/p\u003e\n\u003cp\u003eThe 1.0 and 1.5 fairleads are the industry's first Hawse fairleads compatible with larger 1\/2 inch diameter rope tube thimbles.\u003c\/p\u003e\n\u003cp\u003eThe rope slot height opening is taller to allow the larger 1\/2 inch tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension suck down device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.\u003c\/p\u003e\n\u003cp\u003eWhat is the best surface finish for Hawse aluminum fairleads? Without a doubt it is a Type III hard anodized coating. Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum.\u003c\/p\u003e\n\u003cp\u003eWhy? Because a hard coating can resist the abrasion damage from a dirty\/gritty synthetic winch rope rubbing across it. Especially during extreme side pulls where rope fiber stresses are extremely high. A Mil-A-8625 Type III hard anodized finish leaves a .002 inch thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind. Not too far away from diamond hardness actually.\u003c\/p\u003e\n\u003cp\u003eAnother valuable material property from hard anodized coatings are the low coefficients of friction. Low friction = lower rope heat. Only drawback? Hard anodizing is not offered in typical bright and fancy anodized colors.\u003c\/p\u003e\n\u003cp\u003eAll Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe reason for this is depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch.\u003c\/p\u003e\n\u003cp\u003eIn most cases the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length. In some cases longer bolts are required and 3\/8 inch Grade 5-Grade 8 bolts in 1.25-1.5 inch shank length is a good starting point for fitment. 7\/16 inch bolts may also be used.\u003c\/p\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45629887479962,"sku":"F55-16","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/0001092_hawse-fairlead-10_625.png?v=1742984791"},{"product_id":"offset-hawse-fairlead-factor-55","title":"Offset Hawse Fairlead Factor 55","description":"\u003cp\u003eThe Factor 55 Offset Hawse fairlead is designed specifically for applications with offset openings, such as some ARB-style bumpers.\u003c\/p\u003e\n\u003cp\u003eFactor 55 Hawse Fairleads are the best in the business. They're CNC machined from thick USA 6000-series aluminum bar and thicker than the industry-standard 0.75 inch size to extend rope life. Additionally, the slot opening is taller to allow larger 1\/2 inch tube thimbles to pass through.\u003c\/p\u003e\n\u003cp\u003eAll Factor 55 Fairleads are coated with a durable MIL-A-8625F TYPE III gunmetal gray hard-anodized finish with a laser-engraved logo. That finish is not a cosmetic choice; the hard coating resists abrasion, damage from extreme side pulls, and is one of the top-five hardest materials known to exist. Plus the low friction coefficient means less wear and tear on your rope.\u003c\/p\u003e\n\u003cp\u003ePlease note, mounting hardware is not included. Depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch. In most cases, the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length.\u003c\/p\u003e\n\u003cp\u003eIn some cases, longer bolts are required and 3\/8 inch Grade 5-Grade 8 bolts in 1.25-1.5 inch shank length is a good starting point for fitment. 7\/16 inch bolts may also be used. Contact customer service for specific questions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Always confirm that the synthetic rope cannot make contact to any sharp edges like the opening in the steel fairlead mounting plate or bumper opening. In some cases it may be required to grind this slot larger. Always sand and deburr this opening after any grinding operation.\u003c\/p\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45629888102554,"sku":"F55-26","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/0001107_offset-hawse-fairlead_62.png?v=1742984795"},{"product_id":"short-drum-competition-fairlead-factor-55","title":"Short Drum Competition Fairlead Factor 55","description":"\u003cp\u003eThe Factor 55 Short Drum Competition Fairlead is specifically designed for short-drum winches, such as the WARN 9.0Rc.\u003c\/p\u003e\n\u003cp\u003eFactor 55 Hawse Fairleads are the best in the business. They're CNC machined from thick USA 6000-series aluminum bar and thicker than the industry-standard 0.75 inch size to extend rope life. Additionally, the slot opening is taller to allow larger 1\/2 inch tube thimbles to pass through.\u003c\/p\u003e\n\u003cp\u003eAll Factor 55 Fairleads are coated with a durable MIL-A-8625F TYPE III gunmetal gray hard-anodized finish with a laser-engraved logo. That finish is not a cosmetic choice; the hard coating resists abrasion, damage from extreme side pulls, and is one of the top-five hardest materials known to exist. Plus the low friction coefficient means less wear and tear on your rope.\u003c\/p\u003e\n\u003cp\u003ePlease note, mounting hardware is not included. Depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch. In most cases, the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length.\u003c\/p\u003e\n\u003cp\u003eIn some cases, longer bolts are required and 3\/8 inch Grade 5-Grade 8 bolts in 1.25-1.5 inch shank length is a good starting point for fitment. 7\/16 inch bolts may also be used. Contact customer service for specific questions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Always confirm that the synthetic rope cannot make contact to any sharp edges like the opening in the steel fairlead mounting plate or bumper opening. In some cases it may be required to grind this slot larger. Always sand and deburr this opening after any grinding operation.\u003c\/p\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45629888135322,"sku":"F55-17","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/00017-ggbw.png?v=1742984795"},{"product_id":"hawse-fairlead-1-5-inch-thick-gun-metal-gray-factor-55","title":"Hawse Fairlead 1.5 Inch Thick Gun Metal Gray Factor 55","description":"\u003cp\u003eFactor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.5 fairleads are CNC machined 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick.\u003cbr\u003eThe thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope.\u003c\/p\u003e\n\u003cp\u003eThe 1.0 and 1.5 fairleads are the industry's first Hawse fairleads compatible with larger 1\/2 inch diameter rope tube thimbles.\u003c\/p\u003e\n\u003cp\u003eThe rope slot height opening is taller to allow the larger 1\/2 inch tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension suck down device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.\u003c\/p\u003e\n\u003cp\u003eWhat is the best surface finish for Hawse aluminum fairleads? Without a doubt it is a Type III hard anodized coating. Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum.\u003c\/p\u003e\n\u003cp\u003eWhy? Because a hard coating can resist the abrasion damage from a dirty\/gritty synthetic winch rope rubbing across it. Especially during extreme side pulls where rope fiber stresses are extremely high.\u003c\/p\u003e\n\u003cp\u003eA Mil-A-8625 Type III hard anodized finish leaves a .002 inch thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind. Not too far away from diamond hardness actually.\u003c\/p\u003e\n\u003cp\u003eAnother valuable material property from hard anodized coatings are the low coefficients of friction. Low friction = lower rope heat. Only drawback? Hard anodizing is not offered in typical bright and fancy anodized colors.\u003c\/p\u003e\n\u003cp\u003eAll Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe reason for this is depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch.\u003c\/p\u003e\n\u003cp\u003eIn most cases the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length. In some cases longer bolts are required and 3\/8 inch Grade 5-Grade 8 bolts in 1.25-1.5 inch shank length is a good starting point for fitment. 7\/16 inch bolts may also be used.\u003c\/p\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45629888626842,"sku":"F55-19","price":137.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/0001094_hawse-fairlead-15_625.png?v=1742984799"},{"product_id":"rockguard-aluminum-winch-hawse-fairlead-teraflex","title":"RockGuard Aluminum Winch Hawse Fairlead TeraFlex","description":"\u003cp\u003eProtect your nylon\/synthetic winch cable from sharp edges with this TeraFlex RockGuard Aluminum Winch Hawse Fairlead for the RockGuard Epic or RockGuard Explorer Front Bumpers.\u003c\/p\u003e\n\u003cp\u003eMay fit other aftermarket bumpers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRockGuard Aluminum Winch Hawse Fairlead\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK Wrangler (2-door)\u003c\/li\u003e\n\u003cli\u003eJK Wrangler Unlimited (4-door)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TeraFlex","offers":[{"title":"Default Title","offer_id":46888790851738,"sku":"TF-1803200","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/1803200-FNNT.jpg?v=1767379572"},{"product_id":"poison-spyder-front-winch-fairlead-mount-bracket-black","title":"Poison Spyder Front Winch Fairlead Mount Bracket (Black)","description":"\u003cp\u003eFront Winch Fairlead Mount Bracket (Black) is a Poison Spyder component engineered for serious Jeep builds. High-end winch fairlead mount designed to fit between a Jeep winch and Poison Spyder top-mounted winch bumper for a secure fairlead installation. Uses a 10 x 4.5 inch bolt pattern compatible with common roller and Hawse fairleads, including Warn-style applications. It provides a clean, secure mounting location for the fairlead while retaining compatibility with common roller and Hawse fairlead styles.\u003c\/p\u003e\u003cp\u003eThis part is intended for use with compatible Poison Spyder top-mount winch bumper configurations. Confirm winch, bumper, and fairlead bolt-pattern compatibility before installation.\u003c\/p\u003e","brand":"Poison Spyder","offers":[{"title":"Default Title","offer_id":49215087673498,"sku":"PSP-4557010P1","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/poison-spyder-front-winch-fairlead-mount-bracket-black__16099.webp?v=1789480577"}],"url":"https:\/\/www.rubitrux.com\/collections\/winches-fairleads.oembed?page=2","provider":"RubiTrux","version":"1.0","type":"link"}