{"product_id":"jeep-jk-front-bumper-07-18-wrangler-jk-w-fog-light-holes-the-hammer-series-bare-steel-motobilt","title":"Jeep JK Front Bumper 07-18 Wrangler JK W\/Fog Light Holes The Hammer Series Bare Steel Motobilt","description":"\u003cp\u003eMotobilt now offers the Jeep JK The Hammer front bumper. It features built in provisions for factory style fog lights. The Motobilt Jeep JK Front The Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper\u003c\/li\u003e\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\n\u003cli\u003eFabricated from 3\/16 inch thick high strength steel plate\u003c\/li\u003e\n\u003cli\u003eBolt on design\u003c\/li\u003e\n\u003cli\u003e3\/4 inch thick steel d-ring mounts\u003c\/li\u003e\n\u003cli\u003ePass through d-ring mounts weld to the bumper\u003c\/li\u003e\n\u003cli\u003eIncluded Fog Light Holes\u003c\/li\u003e\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as each\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotobilt bumpers ship bare steel, paint or powdercoat needed before use\u003c\/li\u003e\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch\u003c\/li\u003e\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\n\u003cli\u003eSkid plate sold separately\u003c\/li\u003e\n\u003cli\u003eLED fog light sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MOTOBILT","offers":[{"title":"Default Title","offer_id":46675265487002,"sku":"MB-MB1025F","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/MB1025F-HJQL.jpg?v=1760968427","url":"https:\/\/www.rubitrux.com\/products\/jeep-jk-front-bumper-07-18-wrangler-jk-w-fog-light-holes-the-hammer-series-bare-steel-motobilt","provider":"RubiTrux","version":"1.0","type":"link"}