{"product_id":"next-venture-rear-corner-armor-for-jeep-jku-jl-jlu","title":"Next Venture Rear Corner Armor for Jeep JKU, JL, JLU","description":"\u003cp\u003eNext Venture Rear Corner Armor in one listing. Choose your Jeep \/ style; each choice is a specific Next Venture kit, described below.\u003c\/p\u003e\u003ch3\u003eJKU Rear Corner Armor\u003c\/h3\u003e\u003ch3\u003e\u003cstrong\u003eJKU Rear Corner Armor — Jeep Wrangler JKU 4 Door (2007–2018)\u003c\/strong\u003e\u003c\/h3\u003e \u003ch3\u003e\u003cstrong\u003eTrail-Proven Strength. Precision Fit. Built for the Long Haul.\u003c\/strong\u003e\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eNext Venture Motorsports' JKU Rear Corner Armor\u003c\/strong\u003e delivers serious off-road protection for 2007–2018 Jeep Wrangler Unlimited (JKU) 4-Door models. Formed from \u003cstrong\u003e3\/16\" thick aluminum or steel\u003c\/strong\u003e, these corner guards conform precisely to the factory curves of your JKU — providing better coverage, superior fit, and a cleaner final install than traditional flat-plate designs. If you're going to drill into your Jeep, make it count: this is armor designed to last a lifetime.\u003c\/p\u003e \u003ch3\u003e\u003cstrong\u003eWhy Choose Next Venture Armor\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003ePrecision-Formed to Fit the JKU Body:\u003c\/strong\u003e These aren't generic, flat panels. Our corner armor is \u003cstrong\u003eCNC-formed\u003c\/strong\u003e to match the compound curves of the JKU, delivering seamless coverage from tailgate to wheel well that looks right and protects where it matters most.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eBuilt from 3\/16\" Aluminum or Steel:\u003c\/strong\u003e Choose \u003cstrong\u003elightweight aluminum\u003c\/strong\u003e for trail agility or \u003cstrong\u003esteel\u003c\/strong\u003e for maximum impact resistance. Both options offer full rear corner protection without sacrificing appearance or functionality.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eTwo Lighting Options Available:\u003c\/strong\u003e\u003cbr data-end=\"1526\" data-start=\"1523\"\u003e• \u003cstrong\u003eBlank \/ No Cutout\u003c\/strong\u003e – For customers running factory tail lights or custom lighting solutions\u003cbr data-end=\"1627\" data-start=\"1624\"\u003e• \u003cstrong\u003eRound \/ ORO Style\u003c\/strong\u003e – Pre-cut to accept round LED tail lamps Available separately here.\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eDrill Once, Install for Life:\u003c\/strong\u003e Attaches using included \u003cstrong\u003e1\/4\"-20 rivnuts\u003c\/strong\u003e, offering secure, long-term performance. This is a serious upgrade meant to be done right the first time — and stay put through years of off-road abuse.\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" Aluminum or 3\/16\" Steel\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e ~17 lbs (Aluminum) or ~38 lbs (Steel) per pair\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eLighting Cutout Options:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e \u003cp\u003eBlank (No LED Cutout)\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eRound\/ORO Style (for a recessed 4\" round LED tail lights)\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Ships bare metal — ready for your choice of powder coat or paint\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e 2007–2018 Jeep Wrangler Unlimited JKU 4-Door\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eTailgate\/Fuel Door Cutout Options\u003c\/strong\u003e: Fuel door and tailgate hinge cutouts are included by default but can be omitted on request if you're running a fuel cell or a drop down tailgate conversion.\u003cbr\u003e\u003cbr\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Drilling and trimming of factory tub required; mounts securely with included rivnuts\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eCrafted to Perform — Styled to Match\u003c\/strong\u003e\u003c\/h3\u003e \u003cp\u003eEvery set of JKU corner armor is \u003cstrong\u003elaser-cut, CNC-formed, and hand-welded\u003c\/strong\u003e at our shop in Colorado, USA. This is premium armor made by enthusiasts who live for the trail — with no compromises, no thin-gauge material, and no outsourced shortcuts.\u003c\/p\u003e \u003ch3\u003e\u003cstrong\u003eArmor That Looks Good Because It Works\u003c\/strong\u003e\u003c\/h3\u003e \u003cp\u003eWe design with one philosophy: \u003cstrong\u003eform follows function\u003c\/strong\u003e. The clean, tight fit and aggressive stance of our armor isn’t just a styling choice — it’s the result of engineering it to perform under real-world abuse. It looks this good \u003cem\u003ebecause\u003c\/em\u003e it works this well.\u003c\/p\u003e\u003ch3\u003eJLU Rear Corner Armor (Factory Tail Lamp Cutout)\u003c\/h3\u003e\u003ch3\u003eJLU Rear Corner Armor\u003c\/h3\u003e \u003cp\u003eThe first aluminum corner armor for the JL! These are precisely formed to match your JL's body from 3\/16\" thick aluminum plate or 3\/16\" steel plate (if optioned) for the thickest, most robust corner armor you can buy for your Jeep! If you're going to count on your armor on the trail, you'll want to avoid plastic and thinner gauge metal guards. These are fully compatible with aftermarket or factory rear tail lamps -- which means these *are* compatible with your blind spot detectors if you wish to keep all of your safety features!\u003c\/p\u003e \u003cp\u003eAs anyone who has repaired trail damage and replaced sheet metal on a Jeep will tell you, it's not a big deal to replace a fender, the hood, or a door since they were meant to unbolt anyways. The body tub technically can be unbolted from everything and replaced; however, it is bolted to \u003cem\u003eeverything\u003c\/em\u003e from the frame, to your steering, brakes, and electrical harnesses. You can now protect and strengthen the largest and most integral piece of sheet metal on your JLU with our Rear Corner Armor set.\u003c\/p\u003e \u003ch3\u003eProduct Details\u003c\/h3\u003e \u003cp\u003eUnlike previous Wranglers, the JL really has some curves, so we've done everything we can to wrap tightly around them with this corner armor. About the only thing they won't protect on the corner is the tail lights themselves. We've had our fair share of cracked, broken, and even water-collecting JL tail lamps at this point, and recommend pairing our rear corner armor with our JL Flush Mount LEDs for maximum protection.\u003c\/p\u003e \u003cp\u003eDrilling of the body tub\/ sheet metal and placement of 1\/4\"-20 \"rivnuts\" are required for installation on many of the mounting locations as they are not easily accessed from the backside\/inside. Some can be accessed on the backside via the fuel door or tail lamp cutouts.\u003c\/p\u003e \u003ch3\u003eAdditional Details\u003c\/h3\u003e \u003cp\u003e Products are designed and fabricated to fit vehicles that have varying tolerances from the factory, minor hand fitting may be required.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProducts are shipped bare metal unless otherwise specified by the customer. Bare metal products may have scratches or surface imperfections as a result of raw material handling, manufacturing, and fabrication. However, these imperfections are easily covered up with a textured powder coat finish. Additional finishing, sanding, and prep work may be required if you wish to also have them finished with a smooth powder coat or paint.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProjected lead times are estimates only, and are subject to changes due to production realities, including material and labor availability and sudden variability in order volume. Lead times are not guaranteed, but we do guarantee that we are hard at work trying to get the best product we can produce and into our customers’ hands as quickly as possible.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll Next Venture Motorsports products are laser cut, CNC formed, and hand-weld with pride in the USA. We are a Colorado-based business, and welcome visitors by appointment at our Grand Junction, CO headquarters. We hope to see you out there on the trail soon!\u003c\/p\u003e\u003ch3\u003eJLU Rear Corner Armor (Blank\/Full)\u003c\/h3\u003e\u003ch3\u003eJLU Rear Corner Armor (Full Corner\/Blank)\u003c\/h3\u003e \u003cp\u003eOur evolution of our original corner armor for the JL! When we released the first ever JL corners to the market, we wanted a precise fit, and the ability to offer up full compatibility with factory tail lamps and the blind spot detection system. As we've seen more of our customers go after hardcore trails and making decisions based on rock crawling, the need for full corner armor became evident.\u003cbr\u003e\u003cbr\u003eThese are precisely formed to match your JL's body from 3\/16\" thick aluminum plate for the thickest, most robust corner armor you can buy for your Jeep! If you're going to count on your armor on the trail, you'll want to avoid plastic and thinner gauge metal guards. These are *NOT* compatible with factory rear tail lamps -- which means these are *NOT* compatible with your blind spot detectors. If you wish to keep all of your safety features, check out the JLU Rear Corner Armor (Factory Tail Lamp Cutouts) product here.\u003c\/p\u003e \u003cp\u003eAs anyone who has repaired trail damage and replaced sheet metal on a Jeep will tell you, it's not a big deal to replace a fender, the hood, or a door since they were meant to unbolt anyways. The body tub technically can be unbolted from everything and replaced; however, it is bolted to \u003cem\u003eeverything\u003c\/em\u003e from the frame, to your steering, brakes, and electrical harnesses. You can now protect and strengthen the largest and most integral piece of sheet metal on your JLU with our Rear Corner Armor set.\u003c\/p\u003e \u003ch3\u003eProduct Details\u003c\/h3\u003e \u003cp\u003eUnlike previous Wranglers, the JL really has some curves, so we've done everything we can to wrap tightly around them with this corner armor. About the only thing they won't protect on the corner is the tail lights themselves. We've had our fair share of cracked, broken, and even water-collecting JL tail lamps at this point, and recommend either our oval LED option (included when optioned) or outfit these with your favorite lights like a ORO Round LED!\u003c\/p\u003e \u003cp\u003eDrilling of the body tub sheet metal and placement of 1\/4\"-20 rivet nuts are required for installation. Rivet nuts and button head hardware are included.\u003c\/p\u003e \u003ch3\u003eAdditional Details\u003c\/h3\u003e \u003cp\u003eIf ordering with oval LED cutouts, the LED's are included and are pre-wired, however you'll need to turn off the factory health monitor for the rear turn signals via a JL Tazer or visit your local dealership in order to turn off any dash warnings.\u003cbr\u003e\u003cbr\u003eIf ordered pre-cut for Round Tail Lights, those can be ordered separately here.\u003c\/p\u003e \u003cp\u003e Products are designed and fabricated to fit vehicles that have varying tolerances from the factory, minor hand fitting may be required.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProducts are shipped bare metal unless otherwise specified by the customer. Bare metal products may have scratches or surface imperfections as a result of raw material handling, manufacturing, and fabrication. However, these imperfections are easily covered up with a textured powder coat finish. Additional finishing, sanding, and prep work may be required if you wish to also have them finished with a smooth powder coat or paint.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProjected lead times are estimates only, and are subject to changes due to production realities, including material and labor availability and sudden variability in order volume. Lead times are not guaranteed, but we do guarantee that we are hard at work trying to get the best product we can produce and into our customers’ hands as quickly as possible.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll Next Venture Motorsports products are laser cut, CNC formed, and hand-weld with pride in the USA. We are a Colorado-based business, and welcome visitors by appointment at our Grand Junction, CO headquarters. We hope to see you out there on the trail soon!\u003c\/p\u003e\u003ch3\u003eJLU Rear Corner Armor (Stealth Fuel Door)\u003c\/h3\u003e\u003ch3\u003eJLU Rear Corner Armor — Stealth Fuel Door (Ultimate Coverage + Hidden Fuel Access)\u003c\/h3\u003e \u003cp\u003eThis is the ultimate evolution of our JLU rear corner armor — built for maximum coverage, strength, and a cleaner look.\u003c\/p\u003e \u003cp\u003eFrom the outside, it looks like our full aluminum corner armor, but the driver-side fuel filler access is relocated and hidden \u003cstrong\u003ebehind the driver-side tail lamp\u003c\/strong\u003e. That means \u003cstrong\u003eno giant factory fuel-door cutout\u003c\/strong\u003e in a high-impact area, a \u003cstrong\u003estronger corner\u003c\/strong\u003e, and a \u003cstrong\u003esleek rear quarter\u003c\/strong\u003e that looks finished from every angle. The fuel filler makes a clean \u003cstrong\u003e90-degree twist\u003c\/strong\u003e, clears standard gas-station nozzles, and opens with a \u003cstrong\u003etactile magnetic pop-latch\u003c\/strong\u003e and \u003cstrong\u003espring-loaded hinge\u003c\/strong\u003e that’s satisfying every time you use it. I’ve been driving it, filling it up, and it works beautifully.\u003c\/p\u003e \u003cp\u003eThis isn’t for stretching wheelbase or extreme body trimming — it’s for anyone who wants the cleanest, best-fitting, most trail-ready JLU corner armor we can build.\u003c\/p\u003e \u003ch3\u003eWhy the Stealth Fuel Door is better\u003c\/h3\u003e \u003ch3\u003eStronger by design\u003c\/h3\u003e \u003cp\u003eEliminating the factory fuel-door opening removes a major weak point. More continuous material means more strength where corners get used the hardest.\u003c\/p\u003e \u003ch3\u003eMore coverage where it matters\u003c\/h3\u003e \u003cp\u003eThis kit provides true full-corner coverage and reaches higher on the body in the rear — right where you drag, pivot, and bump the Jeep on ledges and tight obstacles.\u003c\/p\u003e \u003ch3\u003eClean fueling, zero drama\u003c\/h3\u003e \u003cp\u003eFuel access is hidden behind the driver-side tail lamp with an easy 90-degree filler angle. The latch\/hinge setup is simple, proven, and clears standard pump nozzles.\u003c\/p\u003e \u003ch3\u003eBest-fit construction\u003c\/h3\u003e \u003cp\u003eMade from \u003cstrong\u003e3\/16-inch aluminum\u003c\/strong\u003e with internal gusseting for real-world abuse. Installation requires drilling and rivnuts like any serious armor — done right, it fits tight and stays tight.\u003c\/p\u003e \u003ch3\u003eTail lights included — DOT approved with side markers\u003c\/h3\u003e \u003cp\u003eThis kit includes \u003cstrong\u003eORO round LED tail lights\u003c\/strong\u003e, because that’s what ties the system together. These lights are \u003cstrong\u003eDOT approved\u003c\/strong\u003e, include \u003cstrong\u003eside markers\u003c\/strong\u003e, and are fully compatible with street use — keeping this setup \u003cstrong\u003e50-state legal\u003c\/strong\u003e when installed as intended.\u003c\/p\u003e \u003ch3\u003eFitment\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eJeep Wrangler JL Unlimited (JLU) 4-Door\u003c\/strong\u003e\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003e2018–2026\u003c\/strong\u003e (and we’ll keep evolving the platform as Jeep evolves it)\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eDriver-side stealth fuel access behind tail lamp\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eMaterial options\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eStandard:\u003c\/strong\u003e 3\/16-inch aluminum (strong, lightweight, corrosion resistant)\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eAvailable by request:\u003c\/strong\u003e steel version (heavier, but an option if you want it)\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eWhat’s included\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cp\u003eLeft + right rear corner armor (JLU)\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eDriver-side stealth fuel door relocation brackets + latch\/hinge components\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eHose and clamps to complete reroute of fuel filler\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e\u003cstrong\u003eORO round LED tail lights\u003c\/strong\u003e with side markers, reverse lamps, and pre-wired by us to plug into your factory JLU harness\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eRequired installation hardware as specified in the kit\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e\u003ch3\u003eJL Rear Corner Armor (2 Door)\u003c\/h3\u003e\u003ch3\u003eJL 2 Door Rear Corner Armor\u003c\/h3\u003e \u003cp\u003eThe first aluminum corner armor for the JL! These are precisely formed to match your JL's body from 3\/16\" thick aluminum plate or 3\/16\" steel plate (if optioned) for the thickest, most robust corner armor you can buy for your Jeep! If you're going to count on your armor on the trail, you'll want to avoid plastic and thinner gauge metal guards. These are fully compatible with aftermarket or factory rear tail lamps -- which means these *are* compatible with your blind spot detectors if you wish to keep all of your safety features!\u003c\/p\u003e \u003cp\u003eAs anyone who has repaired trail damage and replaced sheet metal on a Jeep will tell you, it's not a big deal to replace a fender, the hood, or a door since they were meant to unbolt anyways. The body tub technically can be unbolted from everything and replaced; however, it is bolted to \u003cem\u003eeverything\u003c\/em\u003e from the frame, to your steering, brakes, and electrical harnesses. You can now protect and strengthen the largest and most integral piece of sheet metal on your JL with our Rear Corner Armor set.\u003c\/p\u003e \u003ch3\u003eProduct Details\u003c\/h3\u003e \u003cp\u003eUnlike previous Wranglers, the JL really has some curves, so we've done everything we can to wrap tightly around them with this corner armor. About the only thing they won't protect on the corner is the tail lights themselves. We've had our fair share of cracked, broken, and even water-collecting JL tail lamps at this point, and recommend pairing our rear corner armor with our JL Flush Mount LEDs for maximum protection.\u003c\/p\u003e \u003cp\u003eDrilling of the body tub\/ sheet metal and placement of 1\/4\"-20 \"rivnuts\" are required for installation on many of the mounting locations as they are not easily accessed from the backside\/inside. Some can be accessed on the backside via the fuel door or tail lamp cutouts.\u003c\/p\u003e \u003ch3\u003eAdditional Details\u003c\/h3\u003e \u003cp\u003e Products are designed and fabricated to fit vehicles that have varying tolerances from the factory, minor hand fitting may be required.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProducts are shipped bare metal unless otherwise specified by the customer. Bare metal products may have scratches or surface imperfections as a result of raw material handling, manufacturing, and fabrication. However, these imperfections are easily covered up with a textured powder coat finish. Additional finishing, sanding, and prep work may be required if you wish to also have them finished with a smooth powder coat or paint.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProjected lead times are estimates only, and are subject to changes due to production realities, including material and labor availability and sudden variability in order volume. Lead times are not guaranteed, but we do guarantee that we are hard at work trying to get the best product we can produce and into our customers’ hands as quickly as possible.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll Next Venture Motorsports products are laser cut, CNC formed, and hand-weld with pride in the USA. We are a Colorado-based business, and welcome visitors by appointment at our Grand Junction, CO headquarters. We hope to see you out there on the trail soon!\u003c\/p\u003e\u003ch3\u003eJL 2 Door Rear Corner Armor (Blank\/Full)\u003c\/h3\u003e\u003ch3\u003eJL 2 Door Rear Corner Armor (Full Corner\/Blank)\u003c\/h3\u003e \u003cp\u003eOur evolution of our original corner armor for the JL! When we released the first ever JL corners to the market, we wanted a precise fit, and the ability to offer up full compatibility with factory tail lamps and the blind spot detection system. As we've seen more of our customers go after hardcore trails and making decisions based on rock crawling, the need for full corner armor became evident.\u003cbr\u003e\u003cbr\u003eThese are precisely formed to match your JL's body from 3\/16\" thick aluminum plate for the thickest, most robust corner armor you can buy for your Jeep! If you're going to count on your armor on the trail, you'll want to avoid plastic and thinner gauge metal guards. These are *NOT* compatible with factory rear tail lamps -- which means these are *NOT* compatible with your blind spot detectors. If you wish to keep all of your safety features, check out the JLU Rear Corner Armor (Factory Tail Lamp Cutouts) product here.\u003c\/p\u003e \u003cp\u003eAs anyone who has repaired trail damage and replaced sheet metal on a Jeep will tell you, it's not a big deal to replace a fender, the hood, or a door since they were meant to unbolt anyways. The body tub technically can be unbolted from everything and replaced; however, it is bolted to \u003cem\u003eeverything\u003c\/em\u003e from the frame, to your steering, brakes, and electrical harnesses. You can now protect and strengthen the largest and most integral piece of sheet metal on your JLU with our Rear Corner Armor set.\u003c\/p\u003e \u003ch3\u003eProduct Details\u003c\/h3\u003e \u003cp\u003eUnlike previous Wranglers, the JL really has some curves, so we've done everything we can to wrap tightly around them with this corner armor. About the only thing they won't protect on the corner is the tail lights themselves. We've had our fair share of cracked, broken, and even water-collecting JL tail lamps at this point, and recommend either our oval LED option (included when optioned) or outfit these with your favorite lights like an ORO Round LED!\u003c\/p\u003e \u003cp\u003eDrilling of the body tub sheet metal and placement of 1\/4\"-20 rivet nuts are required for installation. Rivet nuts and button head hardware are included.\u003c\/p\u003e \u003ch3\u003eAdditional Details\u003c\/h3\u003e \u003cp\u003eIf ordering with oval LED cutouts, the LED's are included and are pre-wired, however you'll need to turn off the factory health monitor for the rear turn signals via a JL Tazer or visit your local dealership in order to turn off any dash warnings.\u003c\/p\u003e \u003cp\u003eIf ordered pre-cut for Round Tail Lights, those can be ordered separately here.\u003c\/p\u003e \u003cp\u003e Products are designed and fabricated to fit vehicles that have varying tolerances from the factory, minor hand fitting may be required.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProducts are shipped bare metal unless otherwise specified by the customer. Bare metal products may have scratches or surface imperfections as a result of raw material handling, manufacturing, and fabrication. However, these imperfections are easily covered up with a textured powder coat finish. Additional finishing, sanding, and prep work may be required if you wish to also have them finished with a smooth powder coat or paint.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eProjected lead times are estimates only, and are subject to changes due to production realities, including material and labor availability and sudden variability in order volume. Lead times are not guaranteed, but we do guarantee that we are hard at work trying to get the best product we can produce and into our customers’ hands as quickly as possible.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll Next Venture Motorsports products are laser cut, CNC formed, and hand-weld with pride in the USA. We are a Colorado-based business, and welcome visitors by appointment at our Grand Junction, CO headquarters. We hope to see you out there on the trail soon!\u003c\/p\u003e","brand":"Next Venture Motorsports","offers":[{"title":"Default Title","offer_id":68330110255258,"sku":"NVM-NV-REAR-CORNER-ARMOR-PL","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/6225\/3210\/files\/OffRoadNChill_JKU-02.jpg?v=1795181396","url":"https:\/\/www.rubitrux.com\/products\/next-venture-rear-corner-armor-for-jeep-jku-jl-jlu","provider":"RubiTrux","version":"1.0","type":"link"}