TeraFlex 2.5" CT2 Short Arm Lift Kit w/ Falcon Shock Options; Wrangler JL

$2,717.95
Free Shipping
In stock

TeraFlex's CT2 Suspension Conquers Any Terrain!

  • 2.5" Lift Coil Springs
  • Adjustable Alpine Short Control Arms
  • True Street & Trail Performance
  • Optional Falcon Shock Configurations
  • Positive, responsive handling w/ Reduced NVH

Fits: 2018+ Wrangler JL (2 & 4 Door)

The all-inclusive TeraFlex Sport CT2 Suspension System delivers true cross trail performance and capability in a dependable and maintenance-free package! Developed for the Jeeper looking for a stable commute and comfortable trail performance, the 2.5” Sport CT2 Suspension System features all eight adjustable Alpine Short Control Arms that bolt directly to the factory locations. The Alpine Control Arms optimize steering geometry for improved highway handling. The additional lift height over factory clears larger diameter tires without compromising on- or off-road stability. The CT2 also adds a Alpine Forged Adjustable Front Track Bar that improves steering response and helps center the axle to optimize vehicle roll center. This system also includes front and rear progressive bump stops that provide progressive compression under high speeds. The Sport CT2 is a simple “install and drive” bolt-on installation with no cutting, welding, or alignment required. These maintenance-free suspension systems provide superior on-road ride quality and comfort with maximum off-road flex. All TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

Cross Trail Suspension Lift:

  • Delivers true Cross Trail (CT) performance
  • Dependable performance w/ zero worries
  • Positive, responsive handling w/ reduced NVH
  • Front Track Bar improves steering response, centers the front axle to optimize vehicle roll center, and reduce body roll for unsurpassed handling
  • Front and rear Progressive Bump Stops protect occupants and the vehicle from hard suspension bottoming
  • Full range of movement for off-road flex and articulation
  • Install and drive, simple bolt-on installation – no welding required
  • TeraFlex Limited Lifetime Warranty against defects

Falcon SP2 3.3 Fast Adjust Piggyback Shocks:

  • The Falcon SP2 3.3 Fast Adjust Piggyback Shocks utilize a three-position knob to change the ride and dampening settings from soft to medium to firm while incorporating an 8-point Micro-Adjust Dial to precisely tune your handle in the medium setting for complete 10-point adjustment control easily accessed and adjusted at the top of the shock.

Falcon SP2 3.1 Piggyback Shocks:

  • The Falcon SP2 3.1 Piggyback Shocks deliver improved ride quality, comfort, and stability, while the increased compression of the piggyback reservoir provides agile off-road handling while being optimized for on-road comfort. Consider the Falcon 3.1 if you want all-out performance without the 10-point adjustability of the 3.3 series.

Falcon SP2 2.1 Monotube Shocks:

  • The Falcon SP2 2.1 Monotube Shocks deliver increased stability and ride quality over stock and other aftermarket shocks and are the perfect choice for those who are looking for all-around performance in a compact and affordable package for both on and off-road performance.

What sets all series of Falcon Shocks apart from the rest?

  • Corner specific shock absorbers, tune for the Wrangler JL
  • Race-inspired performance for increased vehicle stability
  • Improved dynamic roll control and low-speed damping
  • Dramatic improvement in on-road comfort and off-road performance
  • Optimized fitment for unobstructed suspension travel and articulation
  • 2.3" shock body provides optimal performance
  • 6061-T6 aluminum alloy shock body resists Impact to protect internal components
  • Smooth honed internal shock body surface for long-term performance
  • 3/4" induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
  • Large shaft diameter provides a wide range of adjustment on adjustable shocks
  • Hard anodized 6061-T6 aluminum alloy billet piston
  • 1-piece Teflon bronze piston wear band w/ O-ring
  • VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
  • VOD reduces shock bottoming at full compression or over uneven terrain
  • OGS (Oil/Gas Separator) prevents cavitation
  • High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
  • Synthetic formula also contains special anti-wear and lubricity agents
  • 1,000-hour salt spray corrosion resistance test on all hardware
  • Designed, engineered, and assembled in-house from domestic and globally sourced components
  • Serviceable and rebuildable
  • Patented design with 3-year warranty

What does the SP2 mean in the Falcon Shock series?

  • Choose between Soft and Performance modes during installation; Tunes both compression and rebound
  • Soft mode allows a partial bypass of the main piston for a softer ride
  • During aggressive driving, soft mode retains performance tuning for optimal handling
  • Soft mode recommended for rough terrain/surfaces and cold weather
  • Performance mode recommended for max on- and off-road handling, stability, and control
  • SP2 setting selected by rotating the shock shaft 360 degrees while being installed

Lift Kit Includes:

  • Front & Rear Coil Springs
  • Front & Rear Upper Control Arms
  • Front & Rear Lower Control Arms
  • Front Track Bar
  • Rear Track Bar Bracket
  • Progressive Bump Stop Kit
  • Bump Stop Strike Pad Extension Kit
  • Bump Stop Strike Pad Shim Kit
  • Front Sway Bar Disconnects
  • Rear Sway Bar End Links
  • Front Spring Perches
  • All necessary hardware

Notes for Lift:

  • Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1057000) for stock wheels – NOT INCLUDED.
  • Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires.
  • Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) in order to fit 35” tires.
  • Rubicon Fenders require 2” front and 2” rear bump stop extensions (included) in order to fit 35” tires.
  • Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) in order to fit 37” tires.