Get the performance and audio required for Jeep Wranglers & Gladiators with the PSS-24WRA plug-and-play speaker system from Alpine.. The PSS-24WRA has 5-channels of powered sound that replace your dull and bland factory system; 180W 4-channel amplifier, 120W 8" powered subwoofer for under the seat, 6.5" weather-resistant mid-bass drivers, 1" weather-resistant Teteron dome tweeters, and weather-resistant rear sound bar speakers to complete the kit.
Features of the PSS-24WRA:
Complete, five-channel powered sound system upgrade package
Compatible with four-door, non-amplified 2018+ Wrangler JL & 2020+ Gladiator JT
Compatible with two-door, non-scissor front seats in 2019+ Wrangler JL
Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U
180W, 4-channel Power Pack Amplifier
120W, 8” Powered Subwoofer
(2x) 6.5” Weather-Resistant Mid-Bass Drivers
(2x) 1” Weather-Resistant Teteron Dome Tweeters with Vehicle-Specific Connectors & Crossovers
Vehicle Specific Front Speaker Pods with Vehicle-Specific Connectors
Tweeter Adapter Plates Allow for Use of the Original Factory Tweeter Locations
SPV-65-JLT Weather-Resistant Rear Soundbar Speaker System
Rugged, Premium Grills Designed to Emulate the Factory Look and Appeal
Vehicle-Specific Connectors for Plug-and-Play Speaker Installation
Vehicle Specific T-harness for Installation with OEM & Aftermarket Radios
Vehicle Specific Mounting Brackets Allow for the Powered Subwoofer and Amp to be Secured Under the Passenger Seat Without Drilling
More About the PSS-24WRA:
The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018+ Wrangler JL and non-amplified 2020+ Jeep Gladiator.
The PSS-24WRA has 5-channels of powered sound that replace your factory system.
The package includes two sets of 6.5” weather-resistant mid-bass drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer, and a 4-channel power pack amplifier.
The weather-resistant speakers are designed for powerful, top-off performance that’s unhindered by weather, wind, or other noise while driving.
The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction.
The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.
Vehicle-specific speaker connectors and pods are included for plug-and-play installation.
Tweeter adapter plates use the original factory tweeter locations to take the guesswork out of installation.
Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.
The PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and i509-WRA-JL 9-Inch Weather-Resistant Head Unit.
The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into a compatible four-door, non-amplified 2018+ Wrangler JL and non-amplified 2020+ Gladiator.
SPV-65X-WRA (Front):
Power handling: 75 watts RMS (225 watts peak)
Frequency response: 65kHz – 22kHz
Nominal impedance: 4 ohms
Weather-resistant: IP55
SPV-65-JLT (Rear):
Power handling: 90 watts RMS (270 watts peak)
Frequency response: 50kHz – 22kHz
Nominal impedance: 4 ohms
Weather-resistant: IP55
PWE-S8 Powered Subwoofer:
120 watts RMS (240 watts peak)
Frequency response: 32 - 150Hz
Variable low-pass crossover (80-200 Hz)
Variable phase control (0-180 degrees)
preamp- and speaker-level inputs
Four Channel Power Pack Amplifier (KTP-445U):
45 watts RMS x 4 at 4 or 2 ohms
90 watts RMS x 2 bridged at 4 ohms
Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave)
