This all inclusive kit for Wrangler JK Hard Rock, Recon, 10A & 75A Steel Bumper owners includes the Smittybilt X2O 10K Synthetic Rope Winch as well as the Maximus-3 Winch Mount that is required to install a winch in the factory steel bumpers commonly found on Rubicons and other specialty trim packages. From the factory, the bumper is defined as "winch ready", meaning you still need a winch plate and additional install hardware to install and properly fit the winch for recovery and use. The Maximus-3 winch mount plate is made from 1/4" steel and fully integrates into the frame of the JK meaning you get the strongest, most reliable mounting available for the winch. This kit looks to simplify the process for those who want to mount the X2O winch into their bumper by providing a no-questions-asked solution providing all parts needed for installation in one convenient package.

The Smittybilt X2O 10,000 lb. Winch

The Smittybilt X2O Winches have been enhanced in almost every area for increased performance and trouble free operation. Every X2O winch features a Series Wound 6.6 HP motor that is completely sealed, as well as a 3-Stage Planetary Gear System. The X2O winch features a completely waterproof 500 amp solenoid pack that can be mounted in 2 different locations, depending on your application needs. They also include a new controller that can be wired to the winch or unplugged for trouble-free wireless operation. The X2O also features optimized gear ratios that deliver lightning-fast line speeds. If you're looking for something more versatile, check out the X2O Comp Series, which includes all of the features and benefits of the original series, and adds a synthetic winch rope. And finally, all X2O winches are covered by the Smittybilt Lifetime Warranty, providing peace of mind as well as unparalleled performance. With all of these features, you can count on the X2O winch to be there every time, in every situation.

Smittybilt X2O 10,000 lb. Winch Specifications:

• 6.1 ft. per Minute at 10,000 lbs., 415 Amp Draw
• Waterproofing: IP68 Rating
• Rated Line Pull: 10,000 lbs. Single Line
• Motor: 6.6HP Series Wound
• Control: Wireless & Wired 12 ft. Lead
• Gear Train: 3-Stage Planetary
• Gear Ratio: 218:1
• Clutch: Sliding Ring Gear
• Brake: Automatic Out-Of-Drum
• Drum Size: Diameter 2.5 in.
• Cable: 98.5 ft., 3/8 in. Diameter
• Cable Type: Synthetic Rope
• Fairlead: Hawse
• Recommended Battery: 650CCA Minimum for Winching
• Finish: Textured Black
• Weight: 67 lbs.
• Mounting Bolt Pattern: 10 in. x 4.5 in.
• Overall Dimensions: (L x W x H) 22.3 in. x 5.4 in. x 9.4 in.

The Maximus-3 Winch Plate

The Maximus-3 winch plate is an inboard chassis mounted plate that is prepared to get you out of sticky situations. This winch mount plate for Wrangler JK Rubicon Hard Rock, Recon, 10A & 75A factory steel bumpers is a complete bolt-on installation. This plate will easily accommodate Smittybilt winches and is designed with the X2O in mind. It is made of heavy gauge 1/4” steel and brilliantly engineered to provide a structurally strong and stiff mount for your winch.

Maximus-3 Winch Mount Specifications:

• Designed Specifically for the Wrangler JK Rubicon Hard Rock, Recon, 10A & 75A Factory Steel Bumpers
• Made of a One-Piece Heavy Gauge 1/4-inch Steel Plate
• Process: Laser Cut, Press Brake, & Welded
• Load Rating: 12,000 lbs.
• Durable, Satin Black Powder Coat
• Mounts Directly to the Vehicle’s Chassis Frame; 100% Bolt-On
• Weight: 16 lbs.
• Made in The United States